[cisco-voip] Unity Connection 10.0 / SAML

[Brian Meade (brmeade)]

All X.0 software has to be ordered through PUT which is why you don't see it.  PUT will give you a bootable you could use for upgrade or direct install.

-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Robert Kulagowski
Sent: Monday, January 27, 2014 12:47 PM
To: Cisco VOIP
Subject: [cisco-voip] Unity Connection 10.0 / SAML

Single Sign On in Unity Connection prior to 10.0 looks like it was designed to ensure that everyone just ran Exchange for voicemail. It looks like 10.0 might make this better, but all I'm finding for 10.0 on Cisco.com are Locale Installers.

Is 10.0 out yet? All the docs say October 2013, but I'm not seeing an .iso, but that's not surprising. What are the upgrade steps? Will there be a bootable .iso for direct installation, or will you need to bounce through 8.6 or 9.1 on the way to 10?

If it's out and I just don't have the right contract in place yet, has anyone done single sign-on with Unity Connections 10.0 against Active Directory? Does it still require OpenAM?

Thanks
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip