[cisco-voip] Call Manager Active/Inactive version

[Pavan K]

Jose,
That is not supported. If you are using a VM, you could always export the
virtual machine out.
If you are on physical hardware, some old schoolers create backups by
pulling out one of the disks in the raid array as an offline backup.
 On Jul 8, 2014 4:57 PM, "Jose Colon II" <jcolon424 at gmail.com> wrote:

> Is there a way to install call manager into the inactive partition?
>
> Here is my thinking. Lets say call manager on the active partition goes
> down and is not recoverable. It would be beneficial to switch to the
> inactive partition and restore from backup. This obviously has some
> benefits as a standby system ready to be turned on.
>
> Thanks
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140708/3235d8c1/attachment.html>