[cisco-voip] Cisco MWI on IPC Unigy dealer boards

Brian Meade bmeade90 at vt.edu
Mon Jul 21 10:15:27 EDT 2014


Might be worth pulling the traces so we can see the incoming Notify from
CUC and see how it gets handled.


On Sat, Jul 19, 2014 at 7:58 AM, Matthew Collins <
matthewjcollins at btopenworld.com> wrote:

> HI Ryan,
>
> Thanks for you suggestion, I have now changed the integration between the
> CUCM and CUC to SIP but still the MWI is not working. You mention the CUCM
> should be able to direct the unsolicited Notify message to directly to
> Unigy.
>
> Is there anything specific config I would need to configure to enable
> this. I cant seem to find any documentation (except for CUC express) or
> other posts in the forums. I have checked the service parameters and
> enterprise parameter of both the CUCM and CUC server but again cant seem to
> find anything.
>
>
>    *From:* Ryan Ratliff (rratliff) <rratliff at cisco.com>
> *To:* Matthew Collins <Matthewjcollins at btinternet.com>
> *Cc:* "cisco-voip at puck.nether.net" <cisco-voip at puck.nether.net>
> *Sent:* Thursday, 17 July 2014, 14:35
> *Subject:* Re: [cisco-voip] Cisco MWI on IPC Unigy dealer boards
>
>  You may need qsig tunneling over the sip trunk to get MWI working with
> the sccp unity integration.  I bet you will have better luck doing sip to
> unity so UCM can direct the unsolicited notify out to unigy directly.
>
> Sent from my iPhone
>
> On Jul 17, 2014, at 6:00 AM, "Matthew Collins" <
> matthewjcollins at btopenworld.com> wrote:
>
>     Hi All,
>
> Hope one of you will be able to help or point me in the right direction.
>
> CUCM and CUC are both 9.1.1,
>
> CUCM to CUC is SCCP
>
> CUCM to IPC Unigy is SIP
>
> Dial plan on CUCM is E164
>
> Dial Plan on Unigy is 4 digits
>
> CUC account has the Unigy 4 digit extension set as a alternate MWI
>
> I have created a specific 4 digit route pattern pointing to the IPC unigy
> sip trunk
>
> If I dial the MWI on and off numbers from the dealer board I can see them
> hit the CUCM but get NU played back from the dealer board
>
> Sip trunk from IPC Unigy has the CUC partition in its CSS
>
> The Unity ports CSS have access to the 4 digit route pattern pointing to
> the IPC unigy.
>
> Thanks
>
> Matthew
>
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140721/dd71139a/attachment.html>


More information about the cisco-voip mailing list