[cisco-voip] CDR and CMR Dump Tables

[Mark Rudholm]

Yeah, I just double checked that it's set to "Enabled Regardless of CDR 
Enabled Flag"

A lot of the fields are populated, just some are empty, including those 
important ones that would show me network issues.

On 06/13/2014 03:12 PM, Jason Aarons (AM) wrote:
>
> Did you enable Diagnostic CDRs ?
>
> http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/service/5_1_3/car/car/caranrpt.html#wp1037699
>
> *From:*cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On 
> Behalf Of *Mark Rudholm
> *Sent:* Friday, June 13, 2014 5:30 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CDR and CMR Dump Tables
>
>
>
> I'm trying to debug some call quality problems. I took a look at a CDR
> dump data, but the columns relating to packet counts, jitter, and packet
> loss are all empty. Poring through Cisco docs and I can't seem to
> figure out how to enable the logging of these fields.
>
> orignumberOctetsReceived orignumberPacketsLost destnumberPacketsSent
> destnumberOctetsSent destnumberPacketsReceived destnumberOctetsReceived
> destnumberPacketsLost origjitter destjitter origlatency destlatency
>
> Any pointers would be appreciated.
>
> -Mark
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
> itevomcid
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140613/fbea8ec3/attachment.html>