[cisco-voip] Installing CUPS 9 Subscriber - fails on connectivity

[MManly at TEP.com]

Did you enable DNS on either of the servers upon install or are you strictly using IP addressing?

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jeffrey Girard
Sent: Wednesday, June 25, 2014 9:34 AM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] Installing CUPS 9 Subscriber - fails on connectivity

Trying to install a CUPS subscriber in a lab environment.  Version 9

CUPS publisher installed fine.

I started all the services on the Publisher and ran through the initial install wizard

I added the subscriber to the Publisher under System -> Cluster Topology -> DefaultCUPSubcluster

When I install the CUPS sub, it fails when checking connectivity to the Pub.

The error window says “Connectivity check to CUPSPub (172.16.57.59) failed
Is the network connection for CUPSSub up?
Is the network connection for CUPSPub up?
Is CUPSPub powered on?

These VMs are on different subnets.  From a third subnet, I was able to ping both CUPS VMs.  From the CUPSPub CLI, I was able to use utils network ping 172.16.41.251 (IP Address of the CUPSSub) and it was successful.

Any ideas?

Jeff
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140625/fe76daf3/attachment.html>