[cisco-voip] Setting up ICM Sprawler 8.x

[Pavan K]

Ryan,
If you are going to put it up on EC2, you should be able to put the ad on
the same box.

I  havent used EC2 yet for uc so am curious, wouldn't it be cheaper to
build a server ?
On Mar 6, 2014 12:54 PM, "Stephen Welsh" <stephen.welsh at unifiedfx.com>
wrote:

>  I plan to setup a Sprawler at some point too, the following looks like a
> useful guide:
>
>  https://supportforums.cisco.com/docs/DOC-1374
>
>  I states the AD/DNS can be on the same box, however the post is a few
> years old, is this something that changes with a particular release?
>
>  It would be great if there was an updated version of the above guide as
> I know there are usually a ton of caveats and "special settings" that need
> to be taken into consideration.
>
>  Cheers
>
>  Stephen
>
>  On 5 Mar 2014, at 19:12, Beck, Christopher <CBeck at usg.com> wrote:
>
>   Pavan is right.   You will need SQL because the router/logger processes
> are on the server.  If you install the AW/HDS service on a different host,
> that will require SQL as well.  You will need separate server(s) for the
> AD/DNS.  It isn't supported as a function installed on the IPCC servers.
>
>
>  It doesn't matter if you have a sprawler or a multi-server production
> setup, these rules apply.
>
>  Hope it helps,
>  Chris
>
>  *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<cisco-voip-bounces at puck.nether.net>
> ] *On Behalf Of *Ryan Burtch
> *Sent:* Wednesday, March 05, 2014 12:41 PM
> *To:* Pavan K
> *Cc:* cisco-voip at puck.nether.net
> *Subject:* Re: [cisco-voip] Setting up ICM Sprawler 8.x
>
>  This is for a Sprawler.  Do you have any experience setting one of these
> up?
>
>
>
>
>   Sincerely,
>
>   Ryan Burtch
>
>
>  On Wed, Mar 5, 2014 at 1:38 PM, Pavan K <pav.ccie at gmail.com> wrote:
>
>  AD /DNS is usually on a separate box
> You need SQL anywhere on the logger / aw/HDS/dds boxes. So yes you will
> need SQL.
>   On Mar 5, 2014 1:03 AM, "Ryan Burtch" <rburtch3 at gmail.com> wrote:
>
>   I have a couple questions on the ICM Sprawler setup.
>
>   1. Does SQL need to be installed on the Sprawler?
>   2. Can AD/DNS be installed on the Sprawler?
>
>
>
>
>   Sincerely,
>
>   Ryan Burtch
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> Confidentiality Notice: This email is intended for the sole use of the intended
>  recipient(s) and may contain confidential, proprietary or privileged information.
>  If you are not the intended recipient, you are notified that any use, review,
>  dissemination, copying or action taken based on this message or its attachments,
>  if any, is prohibited. If you are not the intended recipient, please contact the
>  sender by reply email and destroy or delete all copies of the original message
>  and any attachments. Thank you.
>
>   _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140307/162b8246/attachment.html>