[cisco-voip] CME with 78XX handsets

[Andy]

Ok,
I know they aren't support as yet but we have been told that you can 
configure CME to think these are a supported handset, but for the life 
of me I can't get it to work.
this has come about as Cisco have eol 69XX series and someone spec'd these.

This is the link we have been given which is a bit light on specifics.

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmebasic.html#wp1291314 
<https://owa.phoenix.co.uk/OWA/redir.aspx?C=F4ga4lJwukudB-ivSuNrhLxKmJUIF9EIdimqFc_g8dbK6eqgZF0n9fzC3SOPRYgMPk4j2p5rixQ.&URL=http%3a%2f%2fwww.cisco.com%2fc%2fen%2fus%2ftd%2fdocs%2fvoice_ip_comm%2fcucme%2fadmin%2fconfiguration%2fguide%2fcmeadm%2fcmebasic.html%23wp1291314>

This is the config I have on the CME

voice register pool-type  7821
  reference-pooltype 7942
!
voice register global
  mode  cme
  source-address 10.226.10.10 port 5060
  max-dn 50
  max-pool 50
  authenticate register
  authenticate realm cisco.com
  tftp-path flash:
  create profile sync 0009594416121429
!
voice register dn  1
  number 5500
  name phone 1
  label 5500
!
voice register pool  1
  busy-trigger-per-button 1
  id mac B838.6116.4A58
  type 7821
  number 1 1
  dtmf-relay sip-notify
  username user1 password cisco
  codec g711ulaw
!

I feel a TAC Case in the offing!

-- 
Regards

Andy

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140319/aed9480b/attachment.html>