[cisco-voip] Troubleshooting SAF/CCD what debugs/logs in CCM?

[Jason Aarons (AM)]

I brought up a IOS with 15.2.4.M6 box, and setup CallManager 9.1(2)  t to send me the DNs 1XXX (some 7965’/9971s with 2001/2002.

I was using these for how-to references;
https://www.youtube.com/watch?v=zZtCfoDfh0g
and
http://pandaeatsbamboo.blogspot.com/2012/04/service-advertisement-framework-saf.html


However nothing shows up in the “show voice  saf dnDb all”.

However if I setup an acl with CallManager’s ip address  I see packets hit IOS, etc.  What debugs or CCM trace files should I be looking at ?

router eigrp VO_SAF_R1
!
service-family ipv4 autonomous-system 1
  !
  sf-interface FastEthernet0/0
   no split-horizon
  exit-sf-interface
  !
  topology base
   external-client CUCM-HQ
  exit-sf-topology
exit-service-family
!
service-routing xmcp listen ipv4
client username ciscociscocisco password 0 ciscociscocisco
  domain 1 default
!
voice service saf
!
channel 1 vrouter VO_SAF_R1 asystem 1
  subscribe callcontrol wildcarded

SAF-R1show service-routing xmcp clients
% No XMCP clients
SAF-R1#show service-routing xmcp server
XMCP Server listening on port 5050
  Socket descriptors: 0 (TCP/IPv4)
  Connected clients: 0 unauthenticated, 0 total
  Maximum clients: unlimited
  Allow-lists: <none>
  Clients configured:
    Username "ciscociscocisco", 0 client(s) connected
SAF-R1#show eigrp service-family ipv4 neighbor top
EIGRP-SFv4 VR(VO_SAF_R1) Topology Table for AS(1)/ID(10.1.5.100)
Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
       r - reply Status, s - sia Status

P 100:1:34323739.32353635.31370000.0, 1 successors, FD is 327745536
        via Connected, Null0
P 100:2:34323739.32353635.31370000.0, 1 successors, FD is 327745536
        via Connected, Null0
P 101:2:8E4866E.0.0.10101, 1 successors, FD is 327745536
        via Connected, Null0
P 101:2:8E4866E.0.0.10100, 1 successors, FD is 327745536
        via Connected, Null0

SAF-R1#show eigrp service-family ipv4 neigh
EIGRP-SFv4 VR(VO_SAF_R1) Service-Family Neighbors for AS(1)





SAF-R1#show voice saf dnDb all
Total no. of patterns in db/max allowed            : 0/6000
Patterns classified under dialplans (private/global) : 0/0
Informational/Error stats -
  Patterns w/ invalid expr detected while add    : 0
  Patterns duplicated under the same instance    : 0
  Patterns rejected overall due to max capacity  : 0
  Attempts to delete a pattern which is invalid  : 0

Last successful DB update @  2014:03:26 20:29:08:243

   ******** Private Dialplan Partition ********

- none -


   ******** Global (E164) Dialplan Partition ********

- none -


SAF-R1#

From: bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] On Behalf Of Brian Meade
Sent: Wednesday, March 26, 2014 8:21 PM
To: Jason Aarons (AM)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] CCD/SAF from CUCM Pub to CUCM Pub (Cluster-Cluster)


You have to use an IOS box as a SAF forwarder.  You can do ILS directly between clusters to advertise URIs.  In 10.0, ILS will let you advertise regular number patterns as well as URIs which makes SAF obsolete.

You can always use something like GNS3 if it's just for the lab.

Brian

On Wed, Mar 26, 2014 at 4:19 PM, Jason Aarons (AM) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:
CUCM 9.1.2

Can I run SAF/CCD direct from Cluster to Cluster or is the eigrp IOS 15.2 mandatory?

Want to lab test it out without a router if possible..

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140327/b91eebbd/attachment.html>