[cisco-voip] Troubleshooting SAF/CCD what debugs/logs in CCM?
Brian Meade
bmeade90 at vt.edu
Thu Mar 27 11:24:37 EDT 2014
Do you have another CUCM cluster using that forwarder? That may be why you
don't see anything subscribed for updates.
Logs look like your trying to advertise the 2XXX pattern.
Here's a doc with some IOS debugs for SAF-
http://www.cisco.com/c/en/us/td/docs/ios-xml/ios/saf/command/saf-cr-book/saf-c1.html#GUID-28CED10A-C70A-4960-BCB8-9A44C4C38CFB
You'll probably need to run the new "debug service-routing xmcp" version of
the commands. Try "debug service-routing xmcp messages".
Brian
On Thu, Mar 27, 2014 at 11:01 AM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:
> I wish I had some saf debug commands on the IOS side I could run to see
> what is going on.
>
>
>
> Attached is the CallManager trace which seems to indicate CallManager
> thinks the router (client label = CUCM-HQ) is "not subscribed" thus
> doesn't Publish any ip addresses to the router?
>
>
>
> SAFConnectionBlockDetails
>
> subStatus ................ UnSubscribed
>
>
>
>
>
>
>
> CallManager IP = 10.1.5.2
>
> SAF Router = 10.1.5.100
>
> CCMAdmin I entered Port = 5050
>
>
>
> Other info; The HQ Router is 10.1.5.5 and is not relevant...
>
>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Jason Aarons (AM)
> *Sent:* Thursday, March 27, 2014 10:11 AM
> *To:* Brian Meade; cisco-voip (cisco-voip at puck.nether.net)
>
> *Subject:* Re: [cisco-voip] Troubleshooting SAF/CCD what debugs/logs in
> CCM?
>
>
>
> Wondering what check boxes under Trace Filter Settings are even related to
> SAF....
>
>
>
>
>
>
>
>
>
> *From:* Brian Meade [mailto:bmeade90 at gmail.com <bmeade90 at gmail.com>]
> *Sent:* Thursday, March 27, 2014 9:36 AM
> *To:* Jason Aarons (AM)
> *Cc:* cisco-voip (cisco-voip at puck.nether.net)
> *Subject:* Re: [cisco-voip] Troubleshooting SAF/CCD what debugs/logs in
> CCM?
>
>
>
> The CallManager service traces should show the advertisements being sent.
>
>
>
> I think the "show voice saf dndb all" command only works if the IOS box is
> a SAF client rather than just a SAF Forwarder. I'd take a look at the
> CallManager traces from both clusters to see if the advertisements are
> being sent out and being received. RTMT has a section where you can see
> the status of your SAF Forwarders as well as see all of the learned
> patterns.
>
>
>
> Brian
>
>
>
> On Thu, Mar 27, 2014 at 9:10 AM, Jason Aarons (AM) <
> jason.aarons at dimensiondata.com> wrote:
>
> I brought up a IOS with 15.2.4.M6 box, and setup CallManager 9.1(2) t to
> send me the DNs 1XXX (some 7965'/9971s with 2001/2002.
>
>
>
> I was using these for how-to references;
>
> https://www.youtube.com/watch?v=zZtCfoDfh0g
>
> and
>
>
> http://pandaeatsbamboo.blogspot.com/2012/04/service-advertisement-framework-saf.html
>
>
>
>
>
> However nothing shows up in the "show voice saf dnDb all".
>
>
>
> However if I setup an acl with CallManager's ip address I see packets hit
> IOS, etc. What debugs or CCM trace files should I be looking at ?
>
>
>
> router eigrp VO_SAF_R1
>
> !
>
> service-family ipv4 autonomous-system 1
>
> !
>
> sf-interface FastEthernet0/0
>
> no split-horizon
>
> exit-sf-interface
>
> !
>
> topology base
>
> external-client CUCM-HQ
>
> exit-sf-topology
>
> exit-service-family
>
> !
>
> service-routing xmcp listen ipv4
>
> client username ciscociscocisco password 0 ciscociscocisco
>
> domain 1 default
>
> !
>
> voice service saf
>
> !
>
> channel 1 vrouter VO_SAF_R1 asystem 1
>
> subscribe callcontrol wildcarded
>
>
>
> SAF-R1show service-routing xmcp clients
>
> % No XMCP clients
>
> SAF-R1#show service-routing xmcp server
>
> XMCP Server listening on port 5050
>
> Socket descriptors: 0 (TCP/IPv4)
>
> Connected clients: 0 unauthenticated, 0 total
>
> Maximum clients: unlimited
>
> Allow-lists: <none>
>
> Clients configured:
>
> Username "ciscociscocisco", 0 client(s) connected
>
> SAF-R1#show eigrp service-family ipv4 neighbor top
>
> EIGRP-SFv4 VR(VO_SAF_R1) Topology Table for AS(1)/ID(10.1.5.100)
>
> Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
>
> r - reply Status, s - sia Status
>
>
>
> P 100:1:34323739.32353635.31370000.0, 1 successors, FD is 327745536
>
> via Connected, Null0
>
> P 100:2:34323739.32353635.31370000.0, 1 successors, FD is 327745536
>
> via Connected, Null0
>
> P 101:2:8E4866E.0.0.10101, 1 successors, FD is 327745536
>
> via Connected, Null0
>
> P 101:2:8E4866E.0.0.10100, 1 successors, FD is 327745536
>
> via Connected, Null0
>
>
>
> SAF-R1#show eigrp service-family ipv4 neigh
>
> EIGRP-SFv4 VR(VO_SAF_R1) Service-Family Neighbors for AS(1)
>
>
>
>
>
>
>
>
>
>
>
> SAF-R1#show voice saf dnDb all
>
> Total no. of patterns in db/max allowed : 0/6000
>
> Patterns classified under dialplans (private/global) : 0/0
>
> Informational/Error stats -
>
> Patterns w/ invalid expr detected while add : 0
>
> Patterns duplicated under the same instance : 0
>
> Patterns rejected overall due to max capacity : 0
>
> Attempts to delete a pattern which is invalid : 0
>
>
>
> Last successful DB update @ 2014:03:26 20:29:08:243
>
>
>
> ******** Private Dialplan Partition ********
>
>
>
> - none -
>
>
>
>
>
> ******** Global (E164) Dialplan Partition ********
>
>
>
> - none -
>
>
>
>
>
> SAF-R1#
>
>
>
> *From:* bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] *On Behalf Of *Brian
> Meade
> *Sent:* Wednesday, March 26, 2014 8:21 PM
> *To:* Jason Aarons (AM)
> *Cc:* cisco-voip (cisco-voip at puck.nether.net)
> *Subject:* Re: [cisco-voip] CCD/SAF from CUCM Pub to CUCM Pub
> (Cluster-Cluster)
>
>
>
>
>
> You have to use an IOS box as a SAF forwarder. You can do ILS directly
> between clusters to advertise URIs. In 10.0, ILS will let you advertise
> regular number patterns as well as URIs which makes SAF obsolete.
>
>
>
> You can always use something like GNS3 if it's just for the lab.
>
>
>
> Brian
>
>
>
> On Wed, Mar 26, 2014 at 4:19 PM, Jason Aarons (AM) <
> jason.aarons at dimensiondata.com> wrote:
>
> CUCM 9.1.2
>
>
>
> Can I run SAF/CCD direct from Cluster to Cluster or is the eigrp IOS 15.2
> mandatory?
>
>
>
> Want to lab test it out without a router if possible..
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
>
>
> itevomcid
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140327/d9820088/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 30876 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140327/d9820088/attachment.png>
More information about the cisco-voip
mailing list