[cisco-voip] 7942 on UCM 8.0

[Brian Meade]

David,

Those are the newer hardware revision phones that require a minimum of
9.3(1)SR1 firmware.  You'll need to install that firmware on all of your
CUCM nodes and restart TFTP service.

Brian


On Mon, Mar 31, 2014 at 9:20 AM, David Zhars <dzhars at gmail.com> wrote:

> No, it's brand new.  It appears to register, but with a strange extension
> and the wrong time.
>
> The bottom of the phone has a little sticker that says "S/W: Must use
> 9.3(1)SR1 or above".
>
> DZ
>
>
> On Mon, Mar 31, 2014 at 9:18 AM, Andy <andy.carse at gmail.com> wrote:
>
>>  Has it been on another cluster before you purchased it, you might have
>> do delete the itl files.
>>
>> Regards
>>
>> Andy
>>
>> On 31/03/2014 13:55, David Zhars wrote:
>>
>>  I bought a Cisco 7942 but it won't register properly on my UCM8.0
>>
>> Do I need to download some files to the UCM, and if so, how do I do that?
>>
>>  Thanks.
>>
>>  DZ
>>
>>
>> _______________________________________________
>> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140331/c16d4498/attachment.html>