[cisco-voip] Effect of installing device package on Device Defaults

[Brian Meade]

Fred,

It will change the device defaults for the other devices.  What I would do
is get some screenshots of the current device defaults, run the device pack
install, set the device defaults back to the original settings, then do the
cluster reboot to enable the 8831 support.

Brian


On Fri, May 2, 2014 at 1:03 PM, Hunt, Frederick
<fhunt at standardprocess.com>wrote:

>  I’m planning to install device package 8.6(2) (24104-1) on a CUCM
> cluster running 8.6.2, in order to add support for 8831 conference phones.
> I’m trying to determine if installing this device package will change the
> device defaults for devices already supported by the system.  From reading
> this document it sounds like it would:
> http://www.cisco.com/web/software/282074299/107528/cmterm-devicepack-8.6.2.24104-1_Readme.pdf.
> Any guidance on what to expect is appreciated.
>
> Thanks,
>
>
>
> Fred
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140502/63e30c90/attachment.html>