[cisco-voip] Multistage Dialing & FAC

Heim, Dennis Dennis.Heim at wwt.com
Fri May 2 15:45:55 EDT 2014


Requirement is to have a speed dial that automatically enters the FAC.

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


From: Wes Sisk (wsisk) [mailto:wsisk at cisco.com]
Sent: Friday, May 02, 2014 2:55 PM
To: Heim, Dennis
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Multistage Dialing & FAC

FAC/CMC is invoked after the route pattern is matched. FAC/CMC only work on the cluster where the device is registered.

I'm not aware of any conflict with multistage dialing offhand. What does multistage dialing mean to you?

-Wes

On May 2, 2014, at 2:14 PM, Heim, Dennis <Dennis.Heim at wwt.com<mailto:Dennis.Heim at wwt.com>> wrote:

Is it possible with multistage dialing to enter in cucm forced authorization codes?

Dennis Heim | Solution Architect (Collaboration)
World Wide Technology, Inc. | 314-212-1814

PS Engineering:  Innovate & Ignite.


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140502/f46afa5d/attachment.html>


More information about the cisco-voip mailing list