[cisco-voip] Digit Delay on 7 digit dialing

[Anthony Holloway]

I don't think DNA shows you potential matches in that way though.

For example: take patterns 1XXX AND 12XX. If I DNA for 1250 I should hit
12XX and DNA should show 1XXX as alternate match. However that does not
cause T302. If I also had a pattern 1250X then I would hit T302 but DNA
will not show it as a potential match.

So darn, no easy way huh?

On Thursday, May 15, 2014, Brian Meade <bmeade90 at vt.edu> wrote:

> There's not an easy way I know of besides using DNA.
>
>
> On Thu, May 15, 2014 at 11:45 AM, Anthony Holloway <
> avholloway+cisco-voip at gmail.com> wrote:
>
> Brian,
>
> Is there a way we can see those potential matches? Trace settings perhaps?
> I'd like to avoid something complicated like dumping the dial plan then
> running it through a python script. Which, if it comes down to it, I'll do
> just that. Thanks.
>
> On Thursday, May 15, 2014, Brian Meade <bmeade90 at vt.edu> wrote:
>
> Matthew,
>
> Just got your log file.  I don't see the good example to compare but
> here's what happens in the bad example:
>
> The Digit Analysis response shows that there are still off-net potential
> matches that exist:
> 80256949.000 |10:38:02.774 |SdlSig   |DaRes
>    |info_da                        |Cdcc(2,100,212,3922322)
>  |Da(2,100,204,1)
>  |2,100,13,6484893.43368^1.8.40.57^SEPC40ACB4D64B2
> |[R:N-H:0,N:0,L:0,V:0,Z:0,D:0] CI=41764100 Dial
> ExclusivelyOffNetPotentialMatchesExist OffNet
> PretransformCgpn=tn=0npi=0ti=1nd=1665pi=0si0
> Cgpn=tn=0npi=0ti=1nd=4013471665pi=0si0
> DialingPartition=fe6a2257-c0b2-4185-a608-e5dab0982065
> DialingPattern=9.[2-9]XXXXXX
> DialingRPRE=(9)([2-9][0-9][0-9][0-9][0-9][0-9][0-9]) PID=(2,82,214)
> PretransformCdpn=tn=0npi=0ti=1nd=92704112pi=0si0
> PretransformTags=ACCESS-CODE:SUBSCRIBER PretransformPos=9:2704112
> CollectedDigits=tn=0npi=0ti=1nd=92704112pi=0si0 Tags=ACCESS-CODE:SUBSCRIBER
> Pos=9:2704112 CalledPartyLocalRouteGroup=patternUsage =5requestID =0
>
>
> The Cdcc process then doesn't do anything for 7 seconds until we see the
> T302 timer end:
> 80260154.000 |10:38:10.277 |SdlSig   |StationT302
>    |overlap_sending2               |StationCdpc(2,100,59,5990797)
>  |SdlTimerService(2,100,3,1)
> |2,100,13,6484893.43368^1.8.40.57^SEPC40ACB4D64B2
> |[R:H-H:0,N:0,L:0,V:0,Z:0,D:0]
>
>
> That's the source of the 7 second delay.  You have some sort of overlap in
> your dialplan.
>
> Brian
>
>
> On Tue, May 13, 2014 at 12:39 PM, Matthew Loraditch <
> MLoraditch at heliontechnologies.com> wrote:
>
>  And apologies to everyone for that log file………… I was doing other things
> and didn’t realize how big it was….
>
> I guess I owe everyone whom I see next week a beer…
>
>
>
>
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
>
> 1965 Greenspring Drive
> Timonium, MD 21093
>
> direct voice. 443.541.1518
> fax.  410.252.9284
>
> Twitter <http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>
> | Website <http://www.heliontechnologies.com/>  |  Email Support
>
> Support Phone.
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140515/424e7f1b/attachment.html>