[cisco-voip] HELP

Ryan Huff ryanhuff at outlook.com
Mon Nov 17 10:36:27 EST 2014


Well, you can't make calls because there are no resources available to negotiate the call, that much is clear. 

I
 assume this issue came about after you upgraded the IOS on the router? 
What platform do you have and what code are you currently running?

The
 firmware for the DSP is in the IOS code itself. As long as you're on 
supported code for the platform, activate the DSP Farm and then reboot 
the router. This should resolve the issue.

Thanks,

Ryan Huff
CCIE Collaboration (Written), CCNP Voice, CCNA Voice
CCNA R/S, CCNA Wireless
UCCX Specialist

Date: Mon, 17 Nov 2014 13:42:03 +0100
From: eteng.okoi at unicem.com.ng
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] HELP

HELP,I CAN'T CALL OUT ON E1 AND FXO. SEE MESSAGE ON THE ROUTER.
voice-card 0 ! Warning! DSPs 5 in slot 0 are using non-default firmware from device flash: ! This is not recommended, the IOS default version is 24.3.3







If you are not the intended recipient and have received this e-mail in error, please delete it immediately from your system and notify the sender by e-mail or telephone. Be notified that you are not to copy, distribute or disclose this e-mail or any of its contents to any other party and any such action may be unlawful.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141117/4ee0219e/attachment.html>


More information about the cisco-voip mailing list