[cisco-voip] PRI E1/T1 utilization

[Ryan Ratliff (rratliff)]

IIRC on the gateway side it's "show isdn stat" and if the gateway is MGCP-controlled you can monitor PRI channel status via RTMT, assuming "enable status poll" is set in CCMAdmin on the PRI.

-Ryan

On Nov 21, 2014, at 12:52 AM, Heim, Dennis <Dennis.Heim at wwt.com<mailto:Dennis.Heim at wwt.com>> wrote:

What protocol is your gateway running?

Dennis Heim | Emerging Technology Architect (Collaboration)
World Wide Technology, Inc. | +1 314-212-1814
<image001.png><https://twitter.com/CollabSensei>
<image002.png><xmpp:dennis.heim at wwt.com><image003.png><tel:+13142121814><image004.png><sip:dennis.heim at wwt.com>


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dharambir kumar varma
Sent: Thursday, November 20, 2014 5:10 AM
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: [cisco-voip] PRI E1/T1 utilization

Hi All,

is it possilble to check PRI utilization on CUCM side or ISR.?

--
 Regards,
 Dharambir Kumar



_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141121/093b82b9/attachment.html>