[cisco-voip] MRA - CUCM in Mixed Mode

[Ryan Ratliff (rratliff)]

Your internal endpoints won't use encrypted media without the secure profile but if you don't care about encryption inside the network and only for internet endpoints then don't worry about it.

-Ryan

On Oct 1, 2014, at 11:52 AM, José Paulo de Oliveira Petry <petrybr at gmail.com<mailto:petrybr at gmail.com>> wrote:

At MRA deployment guide... in "Automatically generated zones and search rules" section it says:

" and a TLS zone is created also if the Unified CM node is
configured with a Cluster Security Mode (System > Enterprise Parameters > Security Parameters) of 1
(Mixed) (so that it can support devices provisioned with secure profiles)."

i know it is not a step, but i though it was necessary to put the cluster security mode to mixed...

if it is not necessary i will continue the implementation without changing this

Thanks!

José Paulo de Oliveira Petry
petrybr at gmail.com<mailto:petrybr at gmail.com>

2014-10-01 12:06 GMT-03:00 Heim, Dennis <Dennis.Heim at wwt.com<mailto:Dennis.Heim at wwt.com>>:
I never changed the cluster to mixed mode. It should still be in non-secure mode.

What doc mentioned that?

Dennis Heim | Collaboration Solutions Architect
World Wide Technology, Inc. | +1 314-212-1814<tel:%2B1%20314-212-1814>
<image002.png><https://twitter.com/CollabSensei>
<image003.png><image004.png><tel:+13142121814><image005.png>


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Matthew Loraditch
Sent: Wednesday, October 01, 2014 8:00 AM
To: José Paulo de Oliveira Petry; Cisco VoIPoE List
Subject: Re: [cisco-voip] MRA - CUCM in Mixed Mode

Where do you see this? I don’t recall the step and didn’t do it on my test bed and everything is working that I have tested. Now I’m curious.


Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
1965 Greenspring Drive
Timonium, MD 21093

direct voice. 443.541.1518
fax.  410.252.9284

Twitter<http://twitter.com/heliontech>  |  Facebook<http://www.facebook.com/#!/pages/Helion/252157915296>  | Website<http://www.heliontechnologies.com/>  |  Email Support<mailto:support at heliontechnologies.com?subject=Technical%20Support%20Request>
Support Phone. 410.252.8830
<image006.png>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of José Paulo de Oliveira Petry
Sent: Wednesday, October 01, 2014 10:50 AM
To: Cisco VoIPoE List
Subject: [cisco-voip] MRA - CUCM in Mixed Mode

Hello all,

First time configuring MRA here...

There is a step that i need to change the "Cluster Security Mode" to "Mixed".

What are the impacts of this change?

I mean, all my registered phones are non-secure, and i want them to stay as non-secure... will something change for them?

Thanks,

José Paulo de Oliveira Petry
petrybr at gmail.com<mailto:petrybr at gmail.com>

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141001/2ddea5f9/attachment.html>