[cisco-voip] 7800s ip phones 8.5

[abbas Wali]

thanks Bala,

so you have to upload/install that to all the nodes/subs and no reboot
required. I have also just seen a cop file for it. in which case, I can
upload the cop file to all the nodes again and restart the TFTP services??

On 6 October 2014 11:49, Bala Singaram <mmailbala at gmail.com> wrote:

> Hi Abbas,
>
> Install the pack in PUB first then other nodes [ SUB ], no need to reboot
> the server, since the device pack will be active version itself.
>
> Regards,
> Bala
>
> On Mon, Oct 6, 2014 at 3:31 AM, abbas Wali <abbaseo at gmail.com> wrote:
>
>> hi all,
>>
>> added new Device Pack for 7800 SIP phones on CUCM 8.5.
>> can see the new phones appearing in the drop down list and in the device
>> defaults.
>> but still the phones are not registering.
>>
>> after the Dev Pack i restarted the TFTP services. do i need to reboot the
>> whole cluster!!
>>
>> also I uploaded the Dev pack only on the TFTP node. does that needed to
>> be on all the nodes (which i dont think so)
>>
>> ​thanks all.​
>>
>> --
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>


-- 
*Abbas Wali*
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141006/47b93bdd/attachment.html>