[cisco-voip] Quick question regarding prompt variables CCX 10.5

[Brian Meade]

I don't see any reason they needed to do it that way that I'm aware of.
Everyone writes code differently so maybe it made more sense to them to do
it that way.

On Wed, Oct 8, 2014 at 2:43 PM, Erick Wellnitz <ewellnitzvoip at gmail.com>
wrote:

> I'm working on someone else's script today and was wondering because they
> duplicated logic for each language.
>
> So I'm clear, I can still do it the following way.
>
> promptVariableString = "P[" + langVariable + "/promptname.wav]"
> promptVariablePrompt = promptVariableString
>
>
>
> On Wed, Oct 8, 2014 at 12:24 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
>> That should work if you have the prompts stored in the EN and SP
>> folders.  What issue are you seeing?
>>
>> On Wed, Oct 8, 2014 at 1:24 PM, Erick Wellnitz <ewellnitzvoip at gmail.com>
>> wrote:
>>
>>> Been a while since I have had to do much with CCX.
>>>
>>> I remember back in the day we could set up some string variables,
>>> concatenate them and have a nice clean way to cut our script in half when
>>> doing two different languages.
>>>
>>> For instance:
>>> 1 - English (set language string to EN)
>>> 2 - Spanish (set language string to SP)
>>>
>>> Then we could concatenate EN + "/" + promptname.wav
>>>
>>> There must be a way that I'm just not seeing.
>>>
>>> Any advice would be great!
>>>
>>> Thanks!
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141008/8ab12061/attachment.html>