[cisco-voip] Phone question

[Haas, Neal]

James

We use these, they work well (we use valcom at our Coroners Facility - they push that button 20 - 40 times a day without issue), and there are others like (www.cyberdata.net/products/voip/digitalanalog/intercom_endpoints.html) I Have used cyberdata for another application I reset that end point minimum of 2 x's a month. I don't know the usage on it.


Neal Haas


-----Original Message-----
From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Andrewartha
Sent: Wednesday, October 22, 2014 7:32 PM
To: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Phone question

On 22/10/14 22:56, Jose Colon II wrote:
> We do this with lobby phones... We make a "lobby partition". Then 
> create a translation pattern that is blank and apply the partition. 
> Then in the partition add the DN you want it to dail.
> 
> What happens is that when that phone is pulled off hook. It auto dials 
> the number we set in the translation pattern.
> 
> Not sure if that helps you but we use it for phones in areas where you 
> need to call someone to "bizz in" someone at the door.

Speaking of door entries, what do people use for intercoms? I've found http://www.valcom.com/products/ip_solutions/ip_intercomdoorphones.htm
which seems alright, but I was wondering if there's any better options.

Thanks,

--
James Andrewartha
Network & Projects Engineer
Christ Church Grammar School
Claremont, Western Australia
Ph. (08) 9442 1757
Mob. 0424 160 877
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip