[cisco-voip] CUCM 10.5 VM boot-up time?

Maciej Karpinski maciej.karpinski at consign.se
Thu Oct 30 08:25:04 EDT 2014


Just made a test on our SME 10.5.1 running on (C240 M3, TRC#2)

Everything was up and running and database was synced 10 minutes and 20
seconds after the restart command was entered from CLI.

But this is a regular restart, a restart during upgrade usually takes
longer time.

Br.
Maciej

On Thu, Oct 30, 2014 at 11:26 AM, <Zoltan.Kelemen at emerson.com> wrote:

>  Hi,
>
>
>
> I’m trying to plan some maintenance time for an upgrade cut-over and I
> would need a ball-park figure at least for the boot-up time of a 10.5 VM
> (C240 M3, TRC#2)
>
> There are no phones on this cluster as it’s a SME, only a handful of SIP
> trunks and plenty route patterns etc.
>
> (As with the wonders of big companies, I was not around while the cluster
> was staged, so I have no helpful information from there)
>
>
>
> Any ideas welcome.
>
>
>
> Thanks,
>
> *Zoltan Kelemen*
> Emerson
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20141030/c1591d26/attachment.html>


More information about the cisco-voip mailing list