[cisco-voip] Limiting concurrent video

[Jason Aarons (AM)]

Ok sorry that was a brain fart.

Duh!

Pre 9.x the  Hub and Spoke was assumed by CUCM Locations CAC.

With 9x we have the new Enhanced Location Call Admission Control.
LBM Group
Locations
Links/Weights



From: bmeade90 at gmail.com [mailto:bmeade90 at gmail.com] On Behalf Of Brian Meade
Sent: Wednesday, September 10, 2014 11:19 AM
To: Jason Aarons (AM)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] Limiting concurrent video


You should be able to use Location-based CAC for the Video calls.  You can set a total video bandwidth there.

On Wed, Sep 10, 2014 at 11:05 AM, Jason Aarons (AM) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:
1.       Is there a way to limit concurrent video call configuration on CUCM and network side across WAN in CUCM 10.x?
Does RSVP or SIP RSVP pre-conditions support limiting concurrent video between clusters? Or the WAN? From what I can tell the answer is no.
Endpoints are SCCP/9971s.

I can set the Region information but that limits per call.  Can I say I only want 384k h264 video calls to use up to a total of 10MB.  And let cucm keep track of the bandwidth being used? Or for video am I limited to QoS in the WAN routers?




Jason Aarons
Consultant
Dimension Data
+1-904-338-3245<tel:%2B1-904-338-3245>


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip



itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140910/0c885b66/attachment.html>