[cisco-voip] Carrier PSTN PRI limit incoming to DID?

[Daniel Pagan]

I agree – it seems the easiest solution would be the max-conn statement on an explicitly matched DP, assuming telco doesn’t support this request and MGCP isn’t controlling this endpoint.



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Anthony Holloway
Sent: Thursday, September 11, 2014 3:39 AM
To: Jason Aarons (AM)
Cc: cisco-voip (cisco-voip at puck.nether.net)
Subject: Re: [cisco-voip] Carrier PSTN PRI limit incoming to DID?

I'm thinking a specific dial peer match with hunstop enabled and a max-conn 10.  Or do you want to avoid gateway changes?

On Wednesday, September 10, 2014, Jason Aarons (AM) <jason.aarons at dimensiondata.com<mailto:jason.aarons at dimensiondata.com>> wrote:
Can the Bells etc limit on the class 5 switch the number of simul calls to a DID coming into my PRI NI2 VWIC2-2MFT-T1/E1?  I only want 10 calls to 770-525-2222, but any other DID allow unlimited calls?

Jason Aarons
Consultant
Dimension Data
+1-904-338-3245

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20140911/b08cc080/attachment.html>