[cisco-voip] Upgrading CUCM from 8.5 to 10.5

Daniel Pagan dpagan at fidelus.com
Sat Apr 11 12:01:01 EDT 2015


Same. Check out the UCMap logs – lots of useful information on what PCD is doing behind the scenes in these logs. You’ll find them stored under the /tomcat/logs/ucmap/ directory via CLI. I’ve been able to gather lots of detailed info on the steps being taken for migration tasks. Combine that with a WinSCP session into PCD (browse through /export sub directories…) and a person can really get more detailed information than what’s offered in documentation.

- Dan

From: Jason Aarons (AM) [mailto:jason.aarons at dimensiondata.com]
Sent: Saturday, April 11, 2015 11:49 AM
To: Daniel Pagan; Heim, Dennis; Matthew Collins; Haas, Neal; 'Andrew Grech'; Nick
Cc: Cisco VoIP Group
Subject: RE: [cisco-voip] Upgrading CUCM from 8.5 to 10.5

I just want to see what is going on.  I like having a window knowing exactly what it’s doing under the covers.  Sort of like Java.  In Java you can pull up the console if you really want to know.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Daniel Pagan
Sent: Saturday, April 11, 2015 11:44 AM
To: Heim, Dennis; Matthew Collins; Haas, Neal; 'Andrew Grech'; Nick
Cc: Cisco VoIP Group
Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5


I’m digging up an old thread here (perhaps because of tender pain points) but the point you made about multi-site is spot on, Dennis… especially if the remote location’s connectivity to the PCD’s site is less than ideal. In this type of scenario, one can encounter issues with PCD where a migration task incorrectly reports failure on the installation step for a migration due to delays in the CUCM installation and PCDs built-in timers (e.g. a 60m wait time before determining a migrated host is unreachable).

When granular control is needed in a large cluster spanning multiple locations, PCD starts to show its limitations but I’m hoping additional features are added that focus on how PCD recovers from certain failures when multiple nodes are grouped within individual install/migrate steps.

- Dan

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Heim, Dennis
Sent: Monday, March 30, 2015 9:16 AM
To: Matthew Collins; Haas, Neal; 'Andrew Grech'; Nick
Cc: Cisco VoIP Group
Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5

PCD is a great tool for single-site installs or upgrades in a lab environment. Biggest limitation of PCD when multisites are involved, since it pushes all ISOs from the PCD server. Maybe an ability to leverage ISOs on VMWare datastores instead of from the PCD server.

Dennis Heim | Emerging Technology Architect (Collaboration)
World Wide Technology, Inc. | +1 314-212-1814
[twitter]<https://twitter.com/CollabSensei>
[chat]<xmpp:dennis.heim at wwt.com>[Phone]<tel:+13142121814>[video]<sip:dennis.heim at wwt.com>
"Innovation happens on project squared" -- http://www.projectsquared.com<http://www.projectsquared.com/>

Click here to join me in my Collaboration Meeting Room<https://wwt.webex.com/meet/dennis.heim>



From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Matthew Collins
Sent: Monday, March 30, 2015 6:08 AM
To: Haas, Neal; 'Andrew Grech'; Nick
Cc: Cisco VoIP Group
Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5

Just a note on this.

I have just completed a direct Hardware 8.5 to VM 10.5 with network changes using Prime collaboration deployment. No Cop files need to be installed, No jump upgrades, No restoring from backup. Really was a simple process.

If you haven’t used PCD I would strongly suggest taking a look next time you upgrade or install a new build.

Regards

Matthew Collins


From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Haas, Neal
Sent: 27 March 2015 14:41
To: 'Andrew Grech'; Nick
Cc: Cisco VoIP Group
Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5

10.5 is VM only, 8.6.1 usually was MCS hardware.

To upgrade you will need to 8.6.1 upgrade to 9.1 on MCS. Then 9.1 MCS to VM, the upgrade 9.1 to 10.5(2)SU1.


Neal Haas

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net]<mailto:[mailto:cisco-voip-bounces at puck.nether.net]> On Behalf Of Andrew Grech
Sent: Friday, March 27, 2015 7:30 AM
To: Nick
Cc: Cisco VoIP Group
Subject: Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5


Supported vs the system will upgrade are two different things.
On 27/03/2015 1:51 AM, "Nick" <csvoip at googlemail.com<mailto:csvoip at googlemail.com>> wrote:
Hi All

Just checking through documentation for CUCM 10.5 for an upgrade, the compatibility guide states that a direct upgrade is from 8.6.1 onwards as shown below.

Upgrade Paths for Cisco Unified Communications Manager Release 10.5(2)SU1

[http://www.cisco.com/c/dam/en/us/td/i/templates/note.gif]
Note


________________________________
If your release is not listed in the following table, find the upgrade path from your current release to a listed release in Cisco Unified Communications Manager Software Compatibility Matrix for Release 9.X and Earlier at http:/​/​www.cisco.com/​en/​US/​docs/​voice_ip_comm/​cucm/​compat/​ccmcompmatr1.pdf<http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf>.
________________________________



Table 15 Export Restricted Supported Cisco Unified Communications Manager Upgrades for Release 10.5(2)SU1


10.5(2)SU1


10.5.2.11900-3


Active


February 24, 2015


Direct Upgrade:

10.5(2), 10.5(1)SU1a, 10.5(1)SU1, 10.5(1), 10.0(1)SU2, 10.0(1)SU1, 10.0(1), 9.1(2)SU2a, 9.1(2)SU2, 9.1(2)SU1, 9.1(2), 9.1(1a), 9.1(1), 9.0(1),

8.6(2a)SU5, 8.6(2a)SU4a, 8.6(2a)SU4, 8.6(2a)SU3, 8.6(2a)SU2, 8.6(2a)SU1, 8.6(2a),

8.6(2), 8.6(1a), 8.6(1)


Supported: (Consult the Cisco Unified Communications Manager Upgrade Guide for details)

8.5.(1)SU7, 8.5.(1)SU6, 8.5(1)SU5, 8.5(1)SU4, 8.5(1)SU3, 8.5(1)SU2,

8.5(1)SU1, 8.5(1), 8.0(3a)SU3, 8.0(3a)SU2, 8.0(3a)SU1, 8.0(3a),

8.0(3), 8.0(2c)SU1, 8.0(2c), 8.0(2b), 8.0(2a), 8.0(2), 8.0(1),

7.1(5b)SU6(restricted), 7.1(5b)SU5(restricted), 7.1(5b)SU4(restricted),

7.1(5b)SU3(restricted), 7.1(5b)SU2(restricted), 7.1(5b)(restricted),

7.1(5a)(restricted), 7.1(5)SU1a(restricted), 7.1(5)SU1(restricted),

7.1(5)(restricted), 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a,

7.1(3a)SU1, 7.1(3a), 7.1(3), 6.1(5)SU3, 6.1(5)SU2, 6.1(5)SU1,

6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4)


However in the Read Me notes for 10.5.2 Su1 it states the following


 

Version and Description

This SU is a cumulative update that incorporates all of the fixes and changes from Cisco Unified Communications Manager 10.5(2) along with additional changes that are specific to this SU.

Note

You can only install this SU on Cisco Unified Communications Manager Release 6.1(4x), 6.1(5x), 7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x), 9.0(x), 9.1(x), 10.0(1), 10.5(1), or 10.5(2) This SU will not install over any 10.5(2)ES’s. Upgrades from 6x, 7x, 8.x, and 9.x need to be requested via PUT (www.cisco.com/upgrade<http://www.cisco.com/upgrade>) to obtain the necessary license. This SU should not be installed on a Business Edition 3000 server.

I would normally always go with what is says in the compatibility matrix, however my colleague has just done an upgrade albeit in a lab from 8.5.1 direct to 10.5.2 SU1.

Anyone know if he just got lucky or if that is now supported?

Regards

Nick




_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


itevomcid
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150411/c9f94afe/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 3876 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150411/c9f94afe/attachment.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image002.png
Type: image/png
Size: 1389 bytes
Desc: image002.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150411/c9f94afe/attachment-0001.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image003.png
Type: image/png
Size: 1292 bytes
Desc: image003.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150411/c9f94afe/attachment-0002.png>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image004.png
Type: image/png
Size: 1391 bytes
Desc: image004.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150411/c9f94afe/attachment-0003.png>


More information about the cisco-voip mailing list