[cisco-voip] 10.5.2 No Call Park Numbers Available

[Daniel Pagan]

Don't think it does but rather the other way around. In this scenario, the called phone pressing park is going to need CSS access to a call park range sitting on the node where the gateway is registered, but I don't think the gateway CSS gets used to allocate that park DN. That's assuming clusterwide call park isn't enabled.

- Dan

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jason Aarons (AM)
Sent: Saturday, April 11, 2015 2:04 PM
To: cisco-voip (cisco-voip at puck.nether.net)
Subject: [cisco-voip] 10.5.2 No Call Park Numbers Available

Inbound call I'm seeing No Call Park Number available on phone.

Doesn't the Gateway CSS need to include the Call Park Number partition?    I see the phone's CSS includes the Call Park Number partition.

http://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-communications-manager-version-70/112043-ucm-callpark-00.html
This guide discusses the Phone CSS but not a gateway CSS.

-jason




-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150411/91fed5cf/attachment.html>