[cisco-voip] BAT on VG350 ports

[Michael T. Voity]

Thanks Dave,

I tried that but, seeing as I have a Windows x64 system and x64 Office 
2013,  my system does not like the xlt file.   I am building a x32 
system, in one of my VM's.   That should allow me to get into the template.

Thanks for the guideline.

-Mike

Michael T. Voity
University of Vermont

On 4/13/2015 4:32 PM, Dave Goodwin wrote:
> Mike, I have not tried this, and it is a pretty recent doc, but take a 
> look at this and see if it might work for you, or at least save you 
> part of the configuration work:
> http://www.cisco.com/c/en/us/support/docs/unified-communications/bulk-administration-tool/118882-config-vg-00.html
>
> -Dave
>
> On Mon, Apr 13, 2015 at 3:56 PM, Michael T. Voity <mvoity at uvm.edu 
> <mailto:mvoity at uvm.edu>> wrote:
>
>     Jason,
>
>     Thanks for the quick response.
>
>     I have been successfully (with removing columns and speed dial
>     stuff) taking a BAT export of all (33) VoIP phones from my 8.5.1BE
>     system to my new 10.5.2 system.
>
>     I only have 1 pots/ analog port on a VG224 on the 8.5.1BE that is
>     not going to be used on on the 10.5.2.
>
>     What I am look for is a way to build 100+ lines on a VG350 in MGCP
>     using BAT in 10.5.2 from scratch.
>
>     Thanks in advance.
>
>     -Mike
>
>     Michael T. Voity
>     University of Vermont
>
>     On 4/13/15 3:29 PM, Jason Aarons (AM) wrote:
>>
>>     You can’t export/import on different versions as the database is
>>     different between versions.
>>
>>     In reality doing an export/import on same version has its own
>>     headaches.
>>
>>     A suitcase export/import tool like COBRAS would be a nice product
>>     enhancement request.
>>
>>     *From:*cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On
>>     Behalf Of *Michael T. Voity
>>     *Sent:* Monday, April 13, 2015 3:17 PM
>>     *To:* voip puck
>>     *Subject:* [cisco-voip] BAT on VG350 ports
>>
>>
>>
>>     Hello,
>>
>>     I have combed the gossamer threads looking for threads on how one
>>     could
>>     export gateway endpoints (POTS analog line) of a vg350, filling the
>>     sheet with 144 lines, then doing an import with the BAT tool.
>>
>>     I have CUCM 10.5.2.10000-5.
>>
>>     I noticed that on my 8.5.1 system that analog phones/line show up
>>     under
>>     "Devices->Phone" and on the 10.5.2 system the analog phones/line
>>     only
>>     show up under "Devices->Gateways->Gateway Endpoints"
>>
>>     Ideas?
>>
>>     -Mike
>>
>>     -- 
>>     Michael T. Voity
>>     University of Vermont
>>
>>     _______________________________________________
>>     cisco-voip mailing list
>>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>>     https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>>     itevomcid
>>
>
>
>     _______________________________________________
>     cisco-voip mailing list
>     cisco-voip at puck.nether.net <mailto:cisco-voip at puck.nether.net>
>     https://puck.nether.net/mailman/listinfo/cisco-voip
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150414/3d111c78/attachment.html>