[cisco-voip] clarification on devices of same Jabber "type"

[Lelio Fulgenzi]

I'm pretty sure that multiple devices of the same Jabber "type" are not supported, but I did a quick search, and found this information from the v10 deployment guide: 

http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/jabber/10_5/CJAB_BK_D6497E98_00_deployment-installation-guide-ciscojabber/configure_voice_and_video_communication.html#JABI_RF_T95996B7_00 

Can represent only one device. If a single user has Cisco Jabber on multiple devices (for example, an iPhone and an iPod Touch), configure separate Cisco Dual Mode for iPhone devices for each in Cisco Unified Communications Manager. 

It has something similar for BOT devices... 

Can represent only one device. If a single user has Cisco Jabber for Android on multiple devices, configure separate Cisco Dual Mode for Android devices for each in Cisco Unified Communications Manager. 


But when I try to find the same information in the v11 deployment guide, it doesn't mention this ability at all. 

Weirder even, when I look at the 10.6 PDF, the paragraphs are gone. 

So as far as I can tell, a user can have a maximum ONE of each Jabber type installed, so, one TCT (iphone or ipod), one BOT (android phone), one TAB (android tablet or iPad). 

I understand that people have managed to configure a second android phone as an android tablet, but that reduces the features. 

Am I on the right track here? 

Lelio 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150804/d4a3a54a/attachment.html>