[cisco-voip] getting the E20 to work on CUCM [RESOLVED]

[Lelio Fulgenzi]

Turns out, the pkg file works. I just needed to go through the wizard and click "register". For some reason, it did everything else automatically, except actually register. 

Weird. 



--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 

----- Original Message -----

From: "Lelio Fulgenzi" <lelio at uoguelph.ca> 
To: cisco-voip at puck.nether.net 
Sent: Thursday, August 6, 2015 12:02:43 PM 
Subject: [cisco-voip] getting the E20 to work on CUCM 


I've unboxed an E20 we had in storage, hoping to get things working. It's currently at 2.1.0. 

In the release notes, v4.1.0 only had one set of software, two "dot pkg" files, one encrypted, one not, saying that this would allow me to connect directly to CUCM. 

Starting with v4.1.1, it separates them out to two sets of software, a "dot pkg" set and a "dot cop" set. 

v4.1.0 was deferred for security issues. 

I'm wondering, if I just upload v4.1.0 onto the thing, it should be enough to connect to CUCM directly. Then I can upgrade it directly from CUCM after I've had a chance to install the COP file onto the TFTP server. 

Thoughts? 

Lelio 


--- 
Lelio Fulgenzi, B.A. 
Senior Analyst, Network Infrastructure 
Computing and Communications Services (CCS) 
University of Guelph 

519‐824‐4120 Ext 56354 
lelio at uoguelph.ca 
www.uoguelph.ca/ccs 
Room 037, Animal Science and Nutrition Building 
Guelph, Ontario, N1G 2W1 


_______________________________________________ 
cisco-voip mailing list 
cisco-voip at puck.nether.net 
https://puck.nether.net/mailman/listinfo/cisco-voip 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150806/cd3dc8d8/attachment.html>