[cisco-voip] 3905 dial tone problem

[Ryan Huff]

Ahhhhh ..... derivitive of the studder .... good stuff Brian, totally forgot about that.

Thanks,

Ryan

-------- Original Message --------
From: Brian Meade <bmeade90 at vt.edu>
Sent: Thursday, August 20, 2015 10:55 PM
To: "Jason Aarons (AM)" <jason.aarons at dimensiondata.com>
Subject: Re: [cisco-voip] 3905 dial tone problem
CC: "cisco-voip (cisco-voip at puck.nether.net)" <cisco-voip at puck.nether.net>

>Do you have audible MWI turned on for the line?
>
>http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm/cmevmail.html#90883
>
>On Thu, Aug 20, 2015 at 6:28 PM, Jason Aarons (AM) <
>jason.aarons at dimensiondata.com> wrote:
>
>> 3905 registered to CME, when you pick up a headset, the dial tone begins.
>> But it seems to skip like an old record, it buzzes and pauses.
>>
>>
>>
>> Not finding a bug, customer didn’t tell me load or CME version etc.
>>
>>
>>
>> I’m thinking this is a load problem as you haven’t even dialed yet.
>>
>>
>>
>>
>>
>>
>>
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150820/c526bd6c/attachment.html>