[cisco-voip] UCCX: CAD To Finesse Migration Utility

[Anthony Holloway]

Just to confirm, this is only supported when upgrading to UCCX 11+?  I have
a 10.6(1)SU1 with finesse and was thinking about using this tool.  Thanks.

On Thu, Nov 12, 2015 at 9:41 AM, Ryan LaFountain (rlafount) <
rlafount at cisco.com> wrote:

> Hi All,
>
> The CAD To Finesse Migration Utility has been posted on DevNet.
>
> If you are looking to migrate a customer to Finesse, please consider using
> this tool to aid in migrating the configuration.
>
> The readme and download location are here:
>
> https://developer.cisco.com/site/finesse/downloads/cad-to-finesse/index.gsp
>
> Please contact me directly if you have any questions or if you run into
> problems using the tool.
>
> Thank you,
>
> Ryan LaFountain
> Unified Contact Center
> Cisco Services
> Direct: +1 919 392 9898
> Hours: M - F 9:00am - 5:00pm Eastern Time
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151203/3e18f2f4/attachment.html>