[cisco-voip] Informix Drivers for CCX

[Justin Steinberg]

what wasn't working about the drivers ?  I've used them before without any
issues.   I suspect maybe it was a 32/64 bit issue.  I've also seen some
weird behavior where the odbc gui is just finicky about how you enter the
data for it to save properly.

On Wed, Feb 4, 2015 at 2:23 PM, Matthew Loraditch <
MLoraditch at heliontechnologies.com> wrote:

>  I had to open a TAC case because our wallboard stopped working. The ODBC
> drivers in the 3.70 and 4.1 informix were not working. The TAC solution was
> to somehow find me an ancient 3.0 version of the Informix SDK. It did start
> working, but it just doesn’t make sense and now our wallboard doesn’t work.
> That’s because of code differences in the SDK. We are trying to correct,
> but something seems off…
>
>
>
> Maybe my google wizardry level is down, but is there somewhere that lists
> the acceptable SDK versions for each CCX version? This client is on 10.0
> SU1… I don’t have that running elsewhere so I can’t compare.
>
>
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
> Network Engineer
> Direct Voice: 443.541.1518
>
>  Facebook <https://www.facebook.com/heliontech?ref=hl> | Twitter
> <https://twitter.com/HelionTech> | LinkedIn
> <https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> |
> G+ <https://plus.google.com/+Heliontechnologies/posts>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150204/20f71fe8/attachment.html>