[cisco-voip] Unified Messaging

[Brian Meade]

6.X SIP stack wasn't all there yet.  Can you pull CallManager traces to see
how far things are getting?

On Thu, Feb 12, 2015 at 4:53 PM, Terry Oakley <Terry.Oakley at rdc.ab.ca>
wrote:

> Currently we are in the process of moving to Call Manager 10.x but
> unfortunately we are still on 6.1 for a little while yet.   Or should that
> be sadly we are still there.   The other push is to more our Exchange
> environment to 2013 from 2007.     Exchange 2007 currently handles our
> voicemail.
>
>
>
> Has anyone out there done something like this and if so how did you
> configure your Call Manager and Exchange 2013?   From examples we have
> configured our SIP trunk to point to destination address of the new 2013
> Exchange box on port 5060.   We have moved a user from 2007 over to 2013
> and set there UM to point to the new voicemail dialplan.    We keep getting
> a fast busy after the call hits the No answer limit.   Messaging button
> produces the same effect but with a significant delay.
>
>
>
> Second question is would you stay with Exchange as your UM or would you
> use Unity?   Of course money is always an issue for education but if there
> are valid reasons to go either way I would appreciate your expertise and
> guidance.
>
>
>
> Thanks
>
>
>
> Terry
>
>
>
>
>
> *Terry Oakley*
>
> Telecommunications Coordinator *| *Information Technology Services
>
> *Red Deer College **|*100 College Blvd. *|* Box 5005 *| *Red Deer *|* Alberta
> *| *T4N 5H5
>
> work (403) 342-*3521   **| * FAX (403) 343-4034
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150212/1d6e61ed/attachment.html>