[cisco-voip] Strange routing behavior cucm 10.5 and int'l pattern

[Ryan Huff]

Try this one on;

Was working fine ...

Standard Int'l route pattern 9.011!# Discard set to PreDot (again, this was working ... no issue on gateway ... etc)

So today it stops working, just rings busy. I debug the ISDN and it shows called party as the last 7 digits. I go over to DNA and use an int'l pattern with the css I was using and it blocks pattern for unallocation.

I create a new test partition with a new 9.011!# pattern in it and a new css with only the new partition in it. I go back over to DNA and try the int'l pattern with the new test css and it blocks for unallocated.

Now I scratch my head, so I take off the octothorpe on the pattern (9.011!) and BOOM, DNA routes and everything is happy. I move to production and it works just fine without the octothorpe.

What does this sound like? Do you think I may have competing patterns somewhere in the dial plan?

Thanks,

Ryan
 		 	   		  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150213/04680993/attachment.html>