[cisco-voip] FXS voltages / POTS compatibility

[Ryan Huff]

Chris,

Can you diagram the connections for me? 

Are the copper pairs swinging off a 66 block before terminating to the alarm panel or is there a direct copper path between the fxs port and the alarm? Are you using an RJ-11 or RJ-14 configuration?

Could you estimate the copper distance between the termination points?

Is the pstn path for the VG SIP or TOM?

Also, I would be curious to know if the alarm panel is a Simplex Grinnell?

Thanks,

Ryan
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150228/49443703/attachment.html>