[cisco-voip] TEHO using SIP trunk ringback issue

[Abebe Amare]

Hi Nate,

I want to thank you for your support on this issue. The problem got
resolved after enabling PRACK on both SIP trunks.

Abebe

On Fri, Jul 24, 2015 at 5:41 PM, Abebe Amare <abucho at gmail.com> wrote:

> Hi Nate,
>
> When you say incoming h323 dial-peer, are you referring to the voip h323
> dial-peer from voice gateway to the call manager? I tried to enable the
> progress_ind commands under the incoming pots dial-peer but it refused.
>
> regards,
>
> abebe
>
> On Fri, Jul 24, 2015 at 5:21 PM, NateCCIE <nateccie at gmail.com> wrote:
>
>> I think incoming h.323 dial-peer.
>>
>>
>>
>> http://www.cisco.com/c/en/us/support/docs/voice/h323/22983-ringback.html
>>
>>
>>
>>
>>
>> *From:* Abebe Amare [mailto:abucho at gmail.com]
>> *Sent:* Friday, July 24, 2015 7:58 AM
>>
>> *To:* NateCCIE
>> *Cc:* cisco voip
>> *Subject:* Re: [cisco-voip] TEHO using SIP trunk ringback issue
>>
>>
>>
>> Hi Nate,
>>
>>
>>
>> Just to confirm, those commands should be applied on the outgoing pots
>> dial-peer?
>>
>>
>>
>>
>>
>>
>>
>> On Fri, Jul 24, 2015 at 4:38 PM, NateCCIE <nateccie at gmail.com> wrote:
>>
>> That is it.  Just do it on both sides.
>>
>>
>>
>> Do you have
>>
>> progress_ind alert enable 8
>>
>> progress_ind progress enable 8
>>
>> progress_ind connect enable 8
>>
>>
>>
>> on your h.323 dial-peers?
>>
>>
>>
>> *From:* Abebe Amare [mailto:abucho at gmail.com]
>> *Sent:* Friday, July 24, 2015 7:18 AM
>> *To:* NateCCIE
>> *Cc:* cisco voip
>> *Subject:* Re: [cisco-voip] TEHO using SIP trunk ringback issue
>>
>>
>>
>> Hi Nate,
>>
>>
>>
>> On the SIP profile I enabled as follows
>>
>>
>>
>> [image: Inline image 1]
>>
>>
>>
>> Is there any other place where I enable PRACK?
>>
>>
>>
>>
>>
>>
>>
>> On Fri, Jul 24, 2015 at 3:38 PM, NateCCIE <nateccie at gmail.com> wrote:
>>
>> Is PRACK enabled on the sip trunk?
>>
>>
>>
>> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On
>> Behalf Of *Abebe Amare
>> *Sent:* Friday, July 24, 2015 1:54 AM
>> *To:* cisco voip
>> *Subject:* [cisco-voip] TEHO using SIP trunk ringback issue
>>
>>
>>
>> Hi,
>>
>>
>>
>> The call flow is like this:
>>
>>
>>
>> CUCM cluster 1 ----SIP Trunk---->CUCM cluster 2---H323---->Voice
>> gateway----ISDN PRI--->PSTN
>>
>>
>>
>> The problem is when calling from cluster 1 to the PSTN, the CUCM in
>> cluster 2 plays ring back tone whether the final destination is
>> reachable or not, we don’t hear the PSTN announcements in case the number
>> is wrong or unreachable or…etc. How to remedy this.
>>
>>
>>
>> thanks in advance
>>
>>
>>
>>
>>
>>
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150728/a49a9bb8/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 6720 bytes
Desc: not available
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150728/a49a9bb8/attachment.png>