[cisco-voip] digit collect kpml vs no digit collect kpml

[秀王]

Hi Group,
for example in korea they have "open dial plan" where local number for
example can be 7 or 8 digits.

By default when digit collect kpml is enabled, it will always match the
dial-peer with 7 digits without giving the user a chance to key in the 8th
digit.

Therefore, i have change it to "no digit collect kpml". However, it seems
like i run into another problem with 8945 phones.

When the user tried to transfer during the SRST mode, it will be back to
"kpml" again when send the first digit for process immediately.

If i change the setting back to "digit collect kpml", it is working fine
for transfer??!

Any one have a sound explanation for this behavior? Right now i have to
merge 2 dial-peers into 1 where i use 9[2-9]T instead of 2 seperate
dial-peer of 9[2-9]XXXXXX and 9[2-9]XXXXXXX.

Regards,
Ki Wi
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150604/599b8a29/attachment.html>