[cisco-voip] BAT and the VG310...

[Jonathan Charles]

OK, the export and reimport worked... sort of... The phones are there and
registered, but under the Gateway, they still show the ? on the ports... I
don't think this worked...

On Mon, Jun 15, 2015 at 9:37 AM, Jonathan Charles <jonvoip at gmail.com> wrote:

> Yeah, I tried just last 10 digits of MAC, tried SKIGWXXXXXXXX, all of it
> got weird results, never adding more than the first device...
>
> I may have to do the export and reimport...
>
> On Mon, Jun 15, 2015 at 9:17 AM, Charles Goldsmith <wokka at justfamily.org>
> wrote:
>
>> I'm not sure Jonathan, I have not done SCCP on a VG310, I would assume it
>> would be the same as a 224, but you know what that gets you (assuming).
>>
>> On Mon, Jun 15, 2015 at 8:39 AM, Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>
>>> I am doing SCCP... so how should it be formed?
>>>
>>> On Mon, Jun 15, 2015 at 7:45 AM, Charles Goldsmith <wokka at justfamily.org
>>> > wrote:
>>>
>>>> Not with MGCP
>>>>
>>>> Sent via C=64 Mobile
>>>>
>>>> On Jun 15, 2015, at 12:09 AM, Jonathan Charles <jonvoip at gmail.com>
>>>> wrote:
>>>>
>>>> So, for Domain Name, did you not specify the SKIGWXXXXXXX or just the
>>>> last 10 of the MAC?
>>>>
>>>>
>>>> Jonathan
>>>>
>>>> On Mon, Jun 15, 2015 at 12:00 AM, Charles Goldsmith <
>>>> wokka at justfamily.org> wrote:
>>>>
>>>>> Jonathan, here is the csv I've used recently with a MGCP vg310.  Just
>>>>> like a 224, I create the gateway template and setup the first port with a
>>>>> line template.
>>>>>
>>>>> I did this recently on a 10.5.2 system with no issues.
>>>>>
>>>>> Let me know if you have any questions.
>>>>>
>>>>>
>>>>> On Sun, Jun 14, 2015 at 10:58 PM, Jonathan Charles <jonvoip at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Tried BATing a VG310 in the same way we used to do a VG224 and it
>>>>>> failed like crazy...it installs the first one, then errors out saying the
>>>>>> domain name already exists...
>>>>>>
>>>>>> I used the BAT template with 10.5.2-11900 and used the tab for the
>>>>>> VG310s.
>>>>>>
>>>>>> I tried adding the VG310 first and not, each time it fails... or just
>>>>>> adds the first port 0...
>>>>>>
>>>>>> Any ideas?
>>>>>>
>>>>>>
>>>>>> Jonathan
>>>>>>
>>>>>>
>>>>>>
>>>>>> _______________________________________________
>>>>>> cisco-voip mailing list
>>>>>> cisco-voip at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>
>>>>>>
>>>>>
>>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150615/b2a32774/attachment.html>