[cisco-voip] New Cisco Media Drivers on Cisco Unified Attendant Console Advanced 10.5

[Matthew Loraditch]

Make sure the CDC that your Ports are using has only IPv4 enabled. That’s killed me a few times.

Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
Network Engineer
Direct Voice: 443.541.1518

Facebook<https://www.facebook.com/heliontech?ref=hl> | Twitter<https://twitter.com/HelionTech> | LinkedIn<https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> | G+<https://plus.google.com/+Heliontechnologies/posts>

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Henry Gicheru (KE)
Sent: Tuesday, June 16, 2015 2:24 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] New Cisco Media Drivers on Cisco Unified Attendant Console Advanced 10.5


Anyone used the Cisco New Media Drivers on Attendant Console?
Am installing CUACA 10.5 on Windows 2008 r2 64-bit and the CTI devices are not registering.
On 32-bit I normally use Wave drivers with no registration issues.
Anything I need to check on my configurations?

Also CUACA subscriber failover, how does it work?


Regards,
Henry Gicheru
System Engineer
Dimension Data
Tel: +25420 499 3000
Mobile: +254733477307
Fax:+254204993200
henry.gicheru at dimensiondata.com<mailto:henry.gicheru at dimensiondata.com>




This email and all contents are subject to the following disclaimer:
"http://www.dimensiondata.com/emaildisclaimer"<http://www.dimensiondata.com/Global/Policies/Pages/Email-Disclaimer.aspx>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150616/bc5553fc/attachment.html>