[cisco-voip] CME w/ SIP Trunk

Wed Jun 24 17:01:43 EDT 2015

Just out of curiosity have you tried using xlite to register one extension directly to verify the credentials?

If you can't register with xlite something is wrong on the sp side.

Sent from my iPhone

On Jun 24, 2015, at 3:41 PM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:

Philip,

Thanks for that - it looks like CME automatically adds the @dnsname (according to what SP is telling me) correctly but its nice to have some confirmation on that part from someone else :)

On Wed, Jun 24, 2015 at 4:30 PM, Walenta, Philip <Philip.Walenta at polycom.com<mailto:Philip.Walenta at polycom.com>> wrote:
Sometimes the “number” requires XXXX at DNSNAME or XXXX at IPADDRESS for the registrar to accept it.  That’s in the normal SIP world.  Not sure how CME would handle that.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net<mailto:cisco-voip-bounces at puck.nether.net>] On Behalf Of Ed Leatherman
Sent: Wednesday, June 24, 2015 3:28 PM
To: Cisco VOIP
Subject: Re: [cisco-voip] CME w/ SIP Trunk

For my own sanity.. can someone tell me if I'm correct on this; the username and password for registering a SIP line with a registrar should look like :
!
sip-ua
 credentials number XXXXX username user1 password MyPassword realm MyRealm
 authentication username user1 password MyPassword
!

Is there any where else it could pull the credentials from? Still getting 403 and SP still just says its a PW mismatch - but i'm just pasting in what they send me (checked for stray spaces and what-not already)

Thanks!
Ed

On Wed, Jun 24, 2015 at 2:32 PM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:
Another one for posterity..

So it seems like SIP REGISTER requests are only shown using debug ccsip noncall ... however there is no output from that command unless debug ccsip messages is also running. very confusing when I only has debug noncall on and didnt see any messages, but they were present in packet cap!

On Wed, Jun 24, 2015 at 11:26 AM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:
Following up for posterity..

Still fighting this one but a small bit of progress. So CME was trying to register both the ephone-dn extension and the E164 expanded number of the extension (which was the correct one) - so SP was putting us in timeout for trying to register invalid numbers. I figured out how to stop that with the number xxx no-reg command in each ephone-dn.

Also, I had to re-write some headers in the REGISTER requests (to/from/request-uri and Authorization fields) with sip profiles.

Also - as brian suggested, they told me the wrong username, should have not had dashes in it.

After all that, still getting back 403 Authentication Failed - but its at least cleaned up and I'm not getting put in timeout.

onward..

On Tue, Jun 23, 2015 at 6:06 PM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:
Didnt seem to help but thats a good thought. Slogging it out with SP tomorrow again. I'm really puzzled about the SIP debugs.. its like i'm not getting all my SIP messages in there

On Tue, Jun 23, 2015 at 3:29 PM, Brian Meade <bmeade90 at vt.edu<mailto:bmeade90 at vt.edu>> wrote:
I'd try the username without the dashes first.

On Tue, Jun 23, 2015 at 3:26 PM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:
I did a packet cap and we are sending the SIP REGISTER, but its not showing up in sip debug?? really weird. anywhere I'm not binding SIP to my loopback address, i'm not getting SIP debugs for.

So I am getting 403 back from SP after all, gonna double check username/passwords

On Tue, Jun 23, 2015 at 3:16 PM, Brian Meade <bmeade90 at vt.edu<mailto:bmeade90 at vt.edu>> wrote:
How about connecting via telnet over 5060?  You may be having a TCP issue which is why you never see the Register sent.

On Tue, Jun 23, 2015 at 3:09 PM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:
Brian
msu-tmp-access#sho sip-ua register status
Line                             peer       expires(sec) reg survival P-Associ-URI
================================ ========== ============ === ======== ============
20311                            20001      43           no  normal
20312                            20003      43           no  normal
20313                            20005      43           no  normal
20314                            20007      43           no  normal
.. etc .. all no

I can ping the sip-server from router so it appears to be able to resolve the name OK.

On Tue, Jun 23, 2015 at 2:48 PM, Brian Meade <bmeade90 at vt.edu<mailto:bmeade90 at vt.edu>> wrote:
What do you see for "show sip-ua register status"?  Are you sure the gateway can resolve the sip-server via DNS?

On Tue, Jun 23, 2015 at 2:32 PM, Ed Leatherman <ealeatherman at gmail.com<mailto:ealeatherman at gmail.com>> wrote:
Hello!

I'm trying to get a SIP trunk out to a regional SP (Lumos) configured. I need to get CME setup to register numbers with their sip proxy, but the registration is not happening and i'm not seeing any register messages debugs from debug ccsip messages to troubleshoot from. So I think maybe CME isn't trying? What should trigger CME to try and register these numbers?

My config looks like this (some ephones/ephone-dns up and registered) - authentication credentials were provided from Lumos. IOS 15.4(3)M2

msu-tmp-access#sh run | s sip-ua
sip-ua
 credentials username 304-929-0300<tel:304-929-0300> password 7 blah realm sbc.ia.ntelos.net<http://sbc.ia.ntelos.net>
 authentication username 304-929-0300<tel:304-929-0300> password 7 blah
 retry register 10
 registrar dns:sbc.ia.ntelos.net:5060<http://sbc.ia.ntelos.net:5060> expires 120
 sip-server dns:sbc.ia.ntelos.net:5060<http://sbc.ia.ntelos.net:5060>
!
msu-tmp-access#sho run | s voice service
voice service voip
 ip address trusted list
  ipv4 216.12.114.195
 address-hiding
 allow-connections sip to sip
 fax protocol t38 version 0 ls-redundancy 0 hs-redundancy 0 fallback none
 sip
  bind control source-interface GigabitEthernet0/2
  bind media source-interface GigabitEthernet0/2
  registrar server
  options-ping 60

--
Ed Leatherman

_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

--
Ed Leatherman

--
Ed Leatherman

--
Ed Leatherman

--
Ed Leatherman

--
Ed Leatherman

--
Ed Leatherman

--
Ed Leatherman
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150624/899c6fcc/attachment.html>