[cisco-voip] Upgrade 9.1.2 to 10.0 fails...

[Jonathan Charles]

I applied the RSA cop file... the version from is 9.1.2.11900-12

I have tried going to:

10.0.1.11900-2
10.5.1.10000-7

Same errors every time.

All of them are the non-bootable ISO.



Jonathan

On Tue, Mar 10, 2015 at 6:22 AM, Ryan Huff <ryanhuff at outlook.com> wrote:

> Jonathan,
>
> Have you applied any other cop or engineering special files besides the
> version 3 keys?
>
> Is your cluster based on the unrestricted export version or the restricted
> export version? Does the update your applying match (restricted versus
> unrestricted)
>
> Can you list out the specific version of 10.0.1 you are using and the
> specific version version of 10.5.1 that you want to go to?
>
> If you do a "show version active" on all the cluster nodes; what do you
> see? Is it the same on all nodes?
>
> I assume you tried to download a new image file from CCO and use that?
>
> Thanks,
>
> Ryan
>
>
> -------- Original Message --------
> From: Jonathan Charles <jonvoip at gmail.com>
> Sent: Tuesday, March 10, 2015 01:30 AM
> To: Andrew Grech <agrech88 at gmail.com>
> Subject: Re: [cisco-voip] Upgrade 9.1.2 to 10.0 fails...
> CC: Cisco VoIP Group <cisco-voip at puck.nether.net>
>
> Well, that didn't work... SFTP'd the ISO to the box, same error...
>
> Same error message...
>
>
>
> Jonathan
>
> On Mon, Mar 9, 2015 at 11:45 PM, Jonathan Charles <jonvoip at gmail.com>
> wrote:
>
>> It is re-running after SFTPing from a Windows box (FreeFTPd)...
>>
>>
>> Jonathan
>>
>> On Mon, Mar 9, 2015 at 11:31 PM, Andrew Grech <agrech88 at gmail.com> wrote:
>>
>>> Hi john, I've had a ISO from Linux to prime with bad permissions and had
>>> this error
>>> On 10/03/2015 1:13 PM, "Jonathan Charles" <jonvoip at gmail.com> wrote:
>>>
>>>> OK, let me try via SFTP (Windows box)... see what happens...
>>>>
>>>>
>>>> Jonathan
>>>>
>>>> On Mon, Mar 9, 2015 at 9:26 PM, Charles Goldsmith <wokka at justfamily.org
>>>> > wrote:
>>>>
>>>>> Given that it is complaining about accessing the upgrade file, are you
>>>>> using dvd image/dvd on the host or sftp?  I'd try a different method to see.
>>>>>
>>>>> Not a whole lot of information, but I have seen SFTP cause similar
>>>>> issues, I think it was a permissions problem on a linux setup using openssh.
>>>>>
>>>>> On Mon, Mar 9, 2015 at 8:16 PM, Jonathan Charles <jonvoip at gmail.com>
>>>>> wrote:
>>>>>
>>>>>> Getting error:
>>>>>>
>>>>>>
>>>>>> Error encountered: An unknown error occurred while accessing the
>>>>>> upgrade file. Warning: A system reboot is required when the upgrade process
>>>>>> completes or is canceled. This will ensure services affected by the upgrade
>>>>>> process are functioning properly.
>>>>>>
>>>>>> Tried upgrade from to 10.0.1 and 10.5.1, same errors...
>>>>>>
>>>>>> I have applied the ciscocm.version3-keys.cop.sgn patch, no change in
>>>>>> behavior...
>>>>>>
>>>>>>
>>>>>> Any ideas?
>>>>>>
>>>>>>
>>>>>>
>>>>>> Jonathan
>>>>>>
>>>>>> _______________________________________________
>>>>>> cisco-voip mailing list
>>>>>> cisco-voip at puck.nether.net
>>>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>>>
>>>>>>
>>>>>
>>>>
>>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150310/c50f6f63/attachment.html>