[cisco-voip] Collaboration Suite v9 with AD2008 with AD2012 schema update (mixed mode)

[Scott Voll]

This was the same thing I got also.  we are running 8.6 with 2012 AD DC's
and running mixed 2008 schema.  No problems.  running CM, UC, UCCx, CER,
etc.

Scott


On Tue, Mar 24, 2015 at 6:09 PM, Jason Aarons (AM) <
jason.aarons at dimensiondata.com> wrote:

>  Dan Keller points out the Cisco officially support AD2012 with CRS 10.x
>
>
>
> https://communities.cisco.com/message/145331
>
>
>
> Cisco will officially support MS AD 2012 in CUCM 10.0.  And the feedback I
> have from the PM for the LDAP component is that although  we will not
> officially test support for CUCM 9.x with AD 2012, it will not be listed on
> the officially supported LDAP list, but it should work fine with older
> versions.
>
>
>
> Thanks,
>
> Dan Keller
>
> Technical Marketing Engineer
>
>
>
>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Matthew Loraditch
> *Sent:* Tuesday, March 24, 2015 10:55 AM
> *To:* Lelio Fulgenzi; Cisco VOIP
> *Subject:* Re: [cisco-voip] Collaboration Suite v9 with AD2008 with
> AD2012 schema update (mixed mode)
>
>
>
>
>
> As a guy with plenty of AD experience, I can tell you, you aren’t going to
> have a problem with this. My internal systems were running this way at some
> point.
>
> The Cisco BUs however are very cautious with this kind of thing and won’t
> list it unless they test it.
>
>
>
> The only time this could ever come up is if you somehow have an AD
> synchronization issue, Cisco points the finger at AD and then you have to
> say you are syncing with 2012 servers.
>
>
>
> It’s a risk calculation you have to make.
>
>
>
> Matthew G. Loraditch – CCNP-Voice, CCNA-R&S, CCDA
> Network Engineer
> Direct Voice: 443.541.1518
>
> Facebook <https://www.facebook.com/heliontech?ref=hl> | Twitter
> <https://twitter.com/HelionTech> | LinkedIn
> <https://www.linkedin.com/company/helion-technologies?trk=top_nav_home> |
> G+ <https://plus.google.com/+Heliontechnologies/posts>
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net
> <cisco-voip-bounces at puck.nether.net>] *On Behalf Of *Lelio Fulgenzi
> *Sent:* Tuesday, March 24, 2015 10:35 AM
> *To:* Cisco VOIP
> *Subject:* [cisco-voip] Collaboration Suite v9 with AD2008 with AD2012
> schema update (mixed mode)
>
>
>
>
>
> Hi everyone,
>
>
>
> Our identity management team has asked about running our AD in mixed mode,
> which would allow them to have 2012 controllers along with 2008
> controllers. However, this requires the 2008 controllers to have the 2012
> schema updates applied.
>
>
>
> The data sheets show only AD 2008 support, and nothing about mixed mode
> support.
>
>
>
> I've got a call into our account team to try and see what support options
> (if any) are available, but I wanted to ask the list about this.
>
>
>
> Is anyone out there running v9 software, e.g. CUCM, Connection, CUPS/IM&P,
> etc, and synchronizing/authenticating against a mixed mode AD environment,
> specifically that which I mention above?
>
>
>
> Was anyone able to get "engineering approval" or whatever they call
> special approval for special configs for this?
>
>
>
> Thanks!
>
>
>
> Lelio
>
>
>
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>
>
>
>
>
> itevomcid
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150325/6c30bff6/attachment.html>