[cisco-voip] Expressway-E Public or Private Certificate?

Brian Meade bmeade90 at vt.edu
Thu Mar 26 17:33:09 EDT 2015


8800 series I believe are on the short list right now.  May even already
have the test firmware released.

On Thu, Mar 26, 2015 at 5:23 PM, Anthony Holloway <
avholloway+cisco-voip at gmail.com> wrote:

> Ryan,
>
> Just to be clear, by Desktop Endpoints you mean DX endpoints, correct?
>
> PS I see you're presenting at CLUS.  Can't wait to attend your session(s)!
>
> On Thu, Mar 26, 2015 at 4:01 PM Ryan Ratliff (rratliff) <
> rratliff at cisco.com> wrote:
>
>>  This is somewhat optional today with TC endpoints and Jabber only
>> supporting MRA.  It will become mandatory when desktop endpoints start
>> supporting MRA in the very near future.
>>
>> -Ryan
>>
>>  On Mar 26, 2015, at 12:45 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>>
>>  I think it was supposed to be "that" rather than "than".
>> On Thu, Mar 26, 2015 at 12:40 PM, Anthony Holloway <
>> avholloway+cisco-voip at gmail.com> wrote:
>>
>>> Dennis, I re-read your reply several times and I cannot make sense of it.
>>>
>>> Are you saying that GoDaddy is the only CA which will work with
>>> Expressway-E and MRA?
>>>
>>>  On Thu, Mar 26, 2015 at 11:16 AM Heim, Dennis <Dennis.Heim at wwt.com>
>>> wrote:
>>>
>> Expressway should be a public certificate. Reports from others than
>>>> goDaddy causes problems.
>>>>
>>>>
>>>>
>>>> *Dennis Heim | Emerging Technology Architect (Collaboration)*
>>>>
>>>> World Wide Technology, Inc. | +1 314-212-1814
>>>>
>>> <image001.png> <https://twitter.com/CollabSensei>
>>>>
>>>> <image002.png><image003.png> <+13142121814><image004.png>
>>>>
>>> "Innovation happens on project squared" -- http://www.projectsquared.com
>>>>
>>>>
>>>>
>>>> *Click here to join me in my Collaboration Meeting Room
>>>> <https://wwt.webex.com/meet/dennis.heim>*
>>>>
>>>
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On
>>>> Behalf Of *bertacco.alessandro at alice.it
>>>> *Sent:* Thursday, March 26, 2015 12:12 PM
>>>> *To:* cisco-voip at puck.nether.net
>>>> *Subject:* [cisco-voip] Expressway-E Public or Private Certificate?
>>>>
>>>>
>>>>
>>>> Hi Guys,
>>>>
>>>>    I've already read all Cisco Documentation about Certificate to load
>>>> on the Expressway infrastructure.
>>>>
>>>>
>>>>
>>>> For the Expressway-C I'll use private certificate signed by internal CA.
>>>>
>>>>
>>>>
>>>>
>>>>
>>>> But what about for the Expressway-E?
>>>>
>>>>
>>>>
>>>> Thank you
>>>>
>>>>
>>>>
>>>> Regards
>>>>
>>>>
>>>>
>>>> Alessandro
>>>>
>>> _______________________________________________
>>>> cisco-voip mailing list
>>>> cisco-voip at puck.nether.net
>>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>>
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>  _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150326/d658a3e0/attachment.html>


More information about the cisco-voip mailing list