[cisco-voip] Upgrading CUCM from 8.5 to 10.5

[Anthony Holloway]

It's so obvious now that you put it like that.  You could only direct
upgrade to 10+ if your source is already virtualized.  Duh!  Thanks for the
reminder.

On Fri, Mar 27, 2015 at 9:41 AM Haas, Neal <nhaas at co.fresno.ca.us> wrote:

>  10.5 is VM only, 8.6.1 usually was MCS hardware.
>
>
>
> To upgrade you will need to 8.6.1 upgrade to 9.1 on MCS. Then 9.1 MCS to
> VM, the upgrade 9.1 to 10.5(2)SU1.
>
>
>
>
>
> Neal Haas
>
>
>
> *From:* cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] *On Behalf
> Of *Andrew Grech
> *Sent:* Friday, March 27, 2015 7:30 AM
> *To:* Nick
> *Cc:* Cisco VoIP Group
>
>
> *Subject:* Re: [cisco-voip] Upgrading CUCM from 8.5 to 10.5
>
>
>
> Supported vs the system will upgrade are two different things.
>
> On 27/03/2015 1:51 AM, "Nick" <csvoip at googlemail.com> wrote:
>
> Hi All
>
>
>
> Just checking through documentation for CUCM 10.5 for an upgrade, the
> compatibility guide states that a direct upgrade is from 8.6.1 onwards as
> shown below.
>
>
>   Upgrade Paths for Cisco Unified Communications Manager Release
> 10.5(2)SU1
>
>
>
> *Note*
>
>
>  ------------------------------
>
> If your release is not listed in the following table, find the upgrade
> path from your current release to a listed release in Cisco Unified
> Communications Manager Software Compatibility Matrix for Release 9.X and
> Earlier at
> http:/​/​www.cisco.com/​en/​US/​docs/​voice_ip_comm/​cucm/​compat/​ccmcompmatr1.pdf
> <http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/compat/ccmcompmatr1.pdf>.
>
>  ------------------------------
>
>
>
> Table 15 Export Restricted Supported Cisco Unified Communications Manager
> Upgrades for Release 10.5(2)SU1
>
> *10.5(2)SU1 *
>
> 10.5.2.11900-3
>
> Active
>
> February 24, 2015
>
> Direct Upgrade:
>
> 10.5(2), 10.5(1)SU1a, 10.5(1)SU1, 10.5(1), 10.0(1)SU2, 10.0(1)SU1,
> 10.0(1), 9.1(2)SU2a, 9.1(2)SU2, 9.1(2)SU1, 9.1(2), 9.1(1a), 9.1(1), 9.0(1),
>
> 8.6(2a)SU5, 8.6(2a)SU4a, 8.6(2a)SU4, 8.6(2a)SU3, 8.6(2a)SU2, 8.6(2a)SU1,
> 8.6(2a),
>
> 8.6(2), 8.6(1a), 8.6(1)
>
> Supported: (Consult the Cisco Unified Communications Manager Upgrade Guide
> for details)
>
> 8.5.(1)SU7, 8.5.(1)SU6, 8.5(1)SU5, 8.5(1)SU4, 8.5(1)SU3, 8.5(1)SU2,
>
> 8.5(1)SU1, 8.5(1), 8.0(3a)SU3, 8.0(3a)SU2, 8.0(3a)SU1, 8.0(3a),
>
> 8.0(3), 8.0(2c)SU1, 8.0(2c), 8.0(2b), 8.0(2a), 8.0(2), 8.0(1),
>
> 7.1(5b)SU6(restricted), 7.1(5b)SU5(restricted), 7.1(5b)SU4(restricted),
>
> 7.1(5b)SU3(restricted), 7.1(5b)SU2(restricted), 7.1(5b)(restricted),
>
> 7.1(5a)(restricted), 7.1(5)SU1a(restricted), 7.1(5)SU1(restricted),
>
> 7.1(5)(restricted), 7.1(3b)SU2, 7.1(3b)SU1, 7.1(3b), 7.1(3a)SU1a,
>
> 7.1(3a)SU1, 7.1(3a), 7.1(3), 6.1(5)SU3, 6.1(5)SU2, 6.1(5)SU1,
>
> 6.1(5), 6.1(4a)SU2, 6.1(4a), 6.1(4)SU1, 6.1(4)
>
>
>
> However in the Read Me notes for 10.5.2 Su1 it states the following
>
>
>
>  *Version and Description*
>
> This SU is a cumulative update that incorporates all of the fixes and
> changes from Cisco Unified Communications Manager 10.5(2) along with
> additional changes that are specific to this SU.
>
> *Note*
>
> You can only install this SU on Cisco Unified Communications Manager
> Release 6.1(4x), 6.1(5x), 7.1(3x), 7.1(5x), 8.0(x), 8.5(1x), 8.6(x),
> 9.0(x), 9.1(x), 10.0(1), 10.5(1), or 10.5(2) This SU will not install over
> any 10.5(2)ES’s. Upgrades from 6x, 7x, 8.x, and 9.x need to be requested
> via PUT (www.cisco.com/upgrade) to obtain the necessary license. This SU
> should not be installed on a Business Edition 3000 server.
>
>
>
> I would normally always go with what is says in the compatibility matrix,
> however my colleague has just done an upgrade albeit in a lab from 8.5.1
> direct to 10.5.2 SU1.
>
>
>
> Anyone know if he just got lucky or if that is now supported?
>
>
>
> Regards
>
>
>
> Nick
>
>
>
>
>
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>  _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150327/3d40ba43/attachment.html>