[cisco-voip] how codec transparent works?

[Ryan Huff]

Codec transparent just passes sdp through to the other call leg without trying to do media negotiations. 

So without codec transparent,  what happens?
Thanks,

Ryan

-------- Original Message --------
From: s m <sam.gh1986 at gmail.com>
Sent: Sunday, May 10, 2015 01:19 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] how codec transparent works?

>hello everybody,
>
>anybody knows how codec transparent works?
>
>i have a strange problem. i want to set h323 trunk between asterisk and
>cisco 2800. it only works when i set codec transparent in dial-peer nodes.
>show commands in cisco shows that i have a call with g711alaw but if i set
>codec g711alaw in dial-peers, i do not have any success call. i know it is
>codec compatibility problem. is there any difference between g711 codecs
>which cisco and asterisk utilize? what happened when codec is set to
>transparent? dose anyone know anything about it?
>
>thanks is advance
>SAM
>
>_______________________________________________
>cisco-voip mailing list
>cisco-voip at puck.nether.net
>https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150510/fb1828b2/attachment.html>