[cisco-voip] what if...... phone loses connectivity while upgrading

[Ryan Ratliff (rratliff)]

Correct, the dual-bank phones will complete the download then reboot to apply the upgrade.  if the download gets interrupted it will just try again.


-Ryan

On May 11, 2015, at 4:58 PM, Brian Meade <bmeade90 at vt.edu<mailto:bmeade90 at vt.edu>> wrote:

I believe the 8800 series has an active/inactive partition so shouldn't be too much of a worry.

On Mon, May 11, 2015 at 4:31 PM, Scott Voll <svoll.voip at gmail.com<mailto:svoll.voip at gmail.com>> wrote:
What if a phone loses connectivity to CM while in the middle of a firmware update?

I need to load new firmware for my 8861's but I have had some connectivity issues over wireless and don't want to brick the phone.

TIA

Scott


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip


_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150512/04e89c1f/attachment.html>