[cisco-voip] CUCM 8.1.3 > Blocking inbound calls

[Brian Meade]

If you're using H.323 or SIP for the voice gateway, easiest to block
inbound via translation-profile on the incoming dial-peer.

If you have a lot of numbers you want to block or are using MGCP, you can
do it in CUCM-
https://supportforums.cisco.com/document/71966/blocking-calls-based-calling-party-id?page=1



On Tue, May 12, 2015 at 1:52 PM, James Dust <
james.dust at charles-stanley.co.uk> wrote:

>  Evening all,
>
>
>
> I have had a request to block a specific number from being able to dial
> into our cluster, but have nothing currently setup to accomplish this.
>
>
>
> The gateway is a Cisco C2921 running SPA.154-2.T.bin
>
>
>
> Is it achievable to block the call on the gateway, or configure this
> somehow on CUCM.
>
>
>
> Any assistance appreciated.
>
>
>
> Regards
>
>
>
> James
>
>
>
> *Consider the environment - Think before you print*
>
> The contents of this email are confidential to the intended recipient and
> may not be disclosed. Although it is believed that this email and any
> attachments are virus free, it is the responsibility of the recipient to
> confirm this.
>
> You are advised that urgent, time-sensitive communications should not be
> sent by email. We hereby give you notice that a delivery receipt does not
> constitute acknowledgement or receipt by the intended recipient(s).
>
> Details of Charles Stanley group companies and their regulators (where
> applicable), can be found at this URL
> http://www.charles-stanley.co.uk/contact-us/disclosure/
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150512/22f77c96/attachment.html>