[cisco-voip] Jabber - WebEx integration query

[Ahmed Abd EL-Rahman]

In this case no need to configure the conference UC service at all in the service profile ? we just should enter the access credentials manually ?



Best Regards

Ahmed Abd EL-Rahman
Senior Network Engineer - KSA

[cid:image001.png at 01CEB2D0.5AD73CC0]
­­
Shahd Center for Investment. Office#6
Emam Saud bin Abdulaziz Road, Olaya, Hay al-Murooj
P.O Box 17384
T +966 11 200 5778-5013
F +966 11 200 5811
M +966 50 792 0925
bmbgroup.com<http://www.bmbgroup.com/>

LEBANON • EGYPT • KSA • JORDAN • IRAQ

CONFIDENTIALITY NOTICE: This e-mail transmission (and/or the attachments accompanying it) may contain confidential information belonging to the sender. The information is intended only for the use of the intended recipient. If you are not the intended recipient, you are hereby notified that any disclosure, copying, distribution or the taking of any action in reliance on the contents of this information is strictly prohibited. Any unauthorized interception of this transmission is illegal under the law. If you have received this transmission in error, please promptly notify the sender by reply e-mail, and then destroy all copies of the transmission.

From: James Buchanan [mailto:james.buchanan2 at gmail.com]
Sent: Sunday, May 31, 2015 11:27 PM
To: Ahmed Abd EL-Rahman
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Jabber - WebEx integration query

Did you enter your whole email address?

There is no other way to send Webex Meetings Server credentials at present.


On 31 May 2015, at 3:23 PM, Ahmed Abd EL-Rahman <Ahmed.Rahman at bmbgroup.com<mailto:Ahmed.Rahman at bmbgroup.com>> wrote:
Hi James,

When I try to do that it gives me a message “cannot verify your account. Check your password and then try again”

Any ideas for possible reasons ?

Also is it the only way to do that is that manual method or there are alternatives, also please if possible let me know any dependencies in terms of CUCM UC service and service profile configurations, specially the authentication source.

Many thanks



Best Regards

Ahmed Abd EL-Rahman
Senior Network Engineer - KSA


From: James Buchanan [mailto:james.buchanan2 at gmail.com]
Sent: Sunday, May 31, 2015 10:47 PM
To: Ahmed Abd EL-Rahman
Cc: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Subject: Re: [cisco-voip] Jabber - WebEx integration query

Hello,

They must go under File, options and manually configure their webex login information .

Thanks,
James



On 31 May 2015, at 2:44 PM, Ahmed Abd EL-Rahman <Ahmed.Rahman at bmbgroup.com<mailto:Ahmed.Rahman at bmbgroup.com>> wrote:
Hi Gents,

I have a setup including CUCM 10.5, IM&Presence 10.5, CUC 10.5, WebEx 2.5 (on premises CWMS), Expressway 8.5, Jabber clients version 10.6

The system is fine and jabber clients works fine and integrated well with CUCM, CUC, IM&P, but not with WebEx.

The webex is working completely fine but from the Jabber client I can’t initiate a webex meeting or access meetings information and all the webex related options are not active as per the following snapshot:
<image001.png>

I already added the webex site URL to a conference UC service which is a assigned to the service profile in use, but still no success.

So any ideas on how to complete the WebEx integration with Jabber client ?





Best Regards

Ahmed Abd EL-Rahman
Senior Network Engineer - KSA
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150531/5f2f7a2a/attachment.html>
-------------- next part --------------
A non-text attachment was scrubbed...
Name: image001.png
Type: image/png
Size: 7377 bytes
Desc: image001.png
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150531/5f2f7a2a/attachment.png>