[cisco-voip] anyone get Cisco IP phones running on Aruba 205H wallplate APs?

[Lelio Fulgenzi]

Yeah - I saw something like that. I was hoping that there was some sort of workaround. Essentially, we're seeing the phone draw 15w on startup then settle back down to 6.3w or something like that. So it has enough to power it, but not during startup. 



Sent from my iPhone

> On Oct 8, 2015, at 4:39 PM, Kevin Przybylowski <kevinp at advancedtsg.com> wrote:
> 
> I was curious –
> https://support.arubanetworks.com/Documentation/tabid/77/DMXModule/512/EntryId/16553/Default.aspx
>  
> The AP-205H has a single 48V DC power connector to support powering through
> an AC-to-DC power adapter. AP-AC-48V36 sold separately.
> The AP-205H supports both PoE-in and PoE-out functionality. The PoE-in (PoEPD)
> allows the E0 port to draw power from 802.3at (preferred) and 802.3af
> (optional) sources.
> When operating in 802.3at mode, the PoE-out (PoE-PSE) functionality is enabled
> on port 3, allowing a maximum output of 10W. If a device attempts to exceed the
> 10W power limit, the E3 port is temporarily disabled. This port automatically
> reactivates over time.
> When operating in 802.3af mode, theAP-205H power to PoE-PSE and USB is
> disabled.
>  
> From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
> Sent: Thursday, October 8, 2015 4:32 PM
> To: voip puck <cisco-voip at puck.nether.net>
> Subject: [cisco-voip] anyone get Cisco IP phones running on Aruba 205H wallplate APs?
>  
>  
> We're testing out a few Aruba 205H wallplate APs and are having trouble getting the phones to powerup. We'd like to power the wallplates with inline power, which might be the issue.
>  
> Thanks!
>  
> LElio
>  
>  
> ---
> Lelio Fulgenzi, B.A.
> Senior Analyst, Network Infrastructure
> Computing and Communications Services (CCS)
> University of Guelph
>  
> 519‐824‐4120 Ext 56354
> lelio at uoguelph.ca
> www.uoguelph.ca/ccs
> Room 037, Animal Science and Nutrition Building
> Guelph, Ontario, N1G 2W1
>  
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20151008/b916a2b0/attachment.html>