[cisco-voip] 3650 PoE Issue

[Casper, Steven]

Module   Available     Used     Remaining
                     (Watts)     (Watts)    (Watts)
------   ---------   --------   ---------
1          1550.0                 141.0      1409.0
2          1550.0                    96.9      1453.1
3          1550.0                165.5      1384.5
4          1550.0               103.6      1446.4
5          1550.0                  98.9      1451.1

Going to try power inline auto max 15400 on the ports supporting the 7940s to see if it makes a difference when the stack reloads.

Steve

From: Ryan Huff [mailto:ryanhuff at outlook.com]
Sent: Wednesday, September 30, 2015 10:18 AM
To: Casper, Steven; cisco-voip voip list
Subject: RE: [cisco-voip] 3650 PoE Issue

How much available power do you have left on the POE backplane once all phones are up and working?


________________________________
From: SCASPER at mtb.com<mailto:SCASPER at mtb.com>
To: cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net>
Date: Wed, 30 Sep 2015 12:33:51 +0000
Subject: [cisco-voip] 3650 PoE Issue
Having an issue related to PoE negotiation between 3650 switches that we are beginning to deploy  and older cisco phones such as 7960s and 7940s . I think these are using the pre PoE standard. Symptoms are when the stack reloads  the  switchports connected to Cisco 7960 telephones come up  in a hung state:

7960 Telephones showed no power
No link lights on switchport
Switchport status showed UP/UP
Switchport remained in UP/UP state even after disconnecting the cable from switchport
Shut/no shut port and the telephone would reboot normally
Moving to available switchport and telephone rebooted normally
Bypassed telephone and connected PC and the PC would reboot normally reconnected telephone and the telephone would reboot normally.

Newer phones such as 7942 come right up.

Once we performed a shut/no shut on all switch ports and all telephones recovered normally but still this is not normal behavior. Going to open a TAC case but wondering if anyone else has experienced  this?
Switches are WS-C3650-48PD on Version 03.03.05SE.

Thanks!
Steve




************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************

_______________________________________________ cisco-voip mailing list cisco-voip at puck.nether.net<mailto:cisco-voip at puck.nether.net> https://puck.nether.net/mailman/listinfo/cisco-voip
************************************
This email may contain privileged and/or confidential information that is intended solely for the use of the addressee.  If you are not the intended recipient or entity, you are strictly prohibited from disclosing, copying, distributing or using any of the information contained in the transmission.  If you received this communication in error, please contact the sender immediately and destroy the material in its entirety, whether electronic or hard copy.  This communication may contain nonpublic personal information about consumers subject to the restrictions of the Gramm-Leach-Bliley Act and the Sarbanes-Oxley Act.  You may not directly or indirectly reuse or disclose such information for any purpose other than to provide the services for which you are receiving the information.
There are risks associated with the use of electronic transmission.  The sender of this information does not control the method of transmittal or service providers and assumes no duty or obligation for the security, receipt, or third party interception of this transmission.
************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150930/0aeb27ce/attachment.html>