[cisco-voip] CUCM Self Provisioning...

[Brian Meade]

You need to make sure you have 2 universal device templates.  One for the
users that have been provisioned and one for new phones set under the
Auto-registration section.

On Wed, Sep 30, 2015 at 5:07 PM, Jonathan Charles <jonvoip at gmail.com> wrote:

> OK, cool... but as soon as I did that, I get a host not found on the new
> phones when they try to load the idle page... weird thing is I checked the
> URL that the phones picked up, and they open an XML page fine from that
> vLAN...
>
>
> Jonathan
>
> On Wed, Sep 30, 2015 at 1:27 PM, Brian Meade <bmeade90 at vt.edu> wrote:
>
>> You need to make another Universal Device Template without the Idle URL
>> set and assign that to the user profile.
>>
>> On Wed, Sep 30, 2015 at 2:06 PM, Jonathan Charles <jonvoip at gmail.com>
>> wrote:
>>
>>> We are using Self Provisioning to have users configure their phones...
>>>
>>> https://CUCMPUB.bananaco.com:443/cucm-uds/xps/selfProvision
>>>
>>> Which works fine... except... after they login and the phone
>>> reconfigures, we still have the idle screen asking for them to login for
>>> self provisioning... how do we make this go away after they have
>>> provisioned their phone?
>>>
>>>
>>>
>>> Jonathan
>>>
>>> _______________________________________________
>>> cisco-voip mailing list
>>> cisco-voip at puck.nether.net
>>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>>
>>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20150930/524a1bd6/attachment.html>