[cisco-voip] BE7K + Nexus FEX module + Port Channel ON (no LACP support)

[Heim, Dennis]

Per this: https://kb.vmware.com/selfservice/search.do?cmd=displayKC&docType=kc&docTypeID=DT_KB_1_1&externalId=2051307

It looks like LACP is supported with vDS, so if you are running vCenter. Other option could be the Nexus1000v. The essentials version of the Nexus1000v, I believe is free, but would require time and effort to configure/stand it up. That looks to be your two options, Lelio.

From: cisco-voip [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Thursday, April 21, 2016 10:34 AM
To: cisco-voip voyp list <cisco-voip at puck.nether.net>
Subject: [cisco-voip] BE7K + Nexus FEX module + Port Channel ON (no LACP support)



Anyone running Cisco UCS 240 (BE7K) with port channel ON connected to Nexus FEX modules?

Our data centre team has concerns with turning port channel ON without LACP negotiation.

Our partner has said that the BE7K does not support LACP.

---
Lelio Fulgenzi, B.A.
Senior Analyst, Network Infrastructure
Computing and Communications Services (CCS)
University of Guelph

519‐824‐4120 Ext 56354
lelio at uoguelph.ca<mailto:lelio at uoguelph.ca>
www.uoguelph.ca/ccs<http://www.uoguelph.ca/ccs>
Room 037, Animal Science and Nutrition Building
Guelph, Ontario, N1G 2W1

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20160421/82c2942c/attachment.html>